Overview

This document provides detailed specifications for two series of indexable tooling components compatible with ZCC and SNDVK systems. It includes item codes, stock availability, dimensional parameters, and corresponding spare parts.

Sections

1. IKT ZT.D Series (Compatible with SNDVK)

This section lists components under the ZT.D designation, specifying dimensions and spare parts for each item.

• Dimensions: Diameter (D), Minimum Diameter (D min), Flange (F), Lengths (L1, L2), Width (W)
• Spare Parts: Insert type (ZT.D-2, ZT.D-3, ZT.D-4, ZT.D-5), Screw size (e.g., M4X12, M6X16, M8X27), and Key type (A3, A4, A5)

Key Parameters:

• Diameter ranges from 16 mm to 40 mm
• Lengths L1 and L2 vary between 2 to 5 mm and 1.5 to 4 mm respectively
• Screw sizes correspond to insert sizes for secure fitting

2. ZCC Series (Compatible with ZCC)

This section details components compatible with the ZCC system, including similar dimensional and spare part data.

• Dimensions: Diameter (D), Minimum Diameter (D min), Flange (F), Lengths (L1, L2), Width (W)
• Spare Parts: Insert type (N123-2C, N123-3C, N123-4C), Screw size (M4X12, M6X16, M8X27), and Key type (A3, A4, A5)

Key Parameters:

• Diameter ranges from 20 mm to 32 mm
• Length L1 is consistently 30 or 35 mm
• Widths vary between 2 and 4 mm

Critical Information and Recommendations

• Ensure compatibility of inserts and screws with the specified tooling system (ZT.D or ZCC).
• Verify dimensional parameters carefully to match tooling requirements.
• Use the correct key type (A3, A4, A5) for assembly and maintenance.
• Stock availability is indicated for each item, facilitating procurement planning.

Summary of Data Tables

The tables provide a comprehensive cross-reference between item codes, dimensions, and spare parts, enabling precise selection of tooling components based on application needs.