Properties of our standard version: • Horizontal mounting position • Standard oil lubrication (for helical & helical bevel gears) • Synthetic grease (for worm gears) • Normal ambient conditions For detailed technical data like rated speed, rated torque, operating factor etc., please refer to our main catalogue. Properties of our standard motors: • With fan (three phase and capacitor motors) • Non-ventilated (EC motors) • No brake, no encoder, no electronic • With leads, length 200 mm, with insulating tube, position on top • 4 poles (three phase and capacitor motors) for helical gears and helical bevel gears • 2 poles for worm gears • Operating mode SI (taking the service factor fB into account) • Non-coated • Protection class: IP 40 • For capacitor motors: capacitor not included Options: • Brakes can be added • Coated • Capacitor enclosed loosely, not fixed Please do not forget to indicate clearly any deviations from the standard model or the standard conditions in your order form. Properties of our standard gears: • With flange • Shaft with feather key • Helical bevel gear: bolt circle on both sides and thread on the front side • K085: Solid shaft with feather key on the right side • K105 and K125: Hollow shaft with feather key • Worm gear with cast-on foot and solid shaft on both sides • Standard rotating direction for the motor is anti-clockwise, e.g. for a 2-stage gear the gear output shaft rotates anti-clockwise, for a 3-stage gear it rotates clockwise. Options: • Helical gear: foot • Helical bevel gear: foot plates, additional flange, torque support • Worm gear: Shaft on one side with flange

Our aim is to manufacture goods of highest quality. For the gears of our Heidrive Program, the surface of the gearings is hardened according to a special method. Heidrive gears are geometrically optimized and rated for endurance strength. They dispose of a compact design, show a very low noise level, are maintenance-free and very robust. Heidrive gears have been designed especially for the field of machine construction. The gears use anti-friction bearings. Optimized output shaft bearings allow high radial and axial forces. The light aluminium housing hardly experiences any corrosion. Due to...