video corpo cad

Flat gear type F105
12Pages

{{requestButtons}}

Catalog excerpts

Flat gear type F105 - 1

Motion & Systems

Open the catalog to page 1
Flat gear type F105 - 2

The flat gear of Heidrive is fitted with ball bearings and therefore allows high axial and radial forces. The gears are filled with synthetic oil, closed and thus maintenance-free. The terminal box is integrated within the case of the gear. With respect to the operating factor the gears have a 1.5 fold overload capacity. • In case of capacitor motors incl. capacitor integrated in the terminal box • 4-pole design for operating mode SI (with respect to the operating factor fB) • Permissible ambient temperature: -10° to +45° C Standard equipment: • Fully synthetic oil filling • Screw hole...

Open the catalog to page 2
Flat gear type F105 - 3

Motion & Systems ■ ContentGeneral information Introduction p. 2 Type 263.30 Type 263.45 Type 263.75 Type 234.30 Type 234.45 Type 234.75

Open the catalog to page 3
Flat gear type F105 - 4

Alternately, the motors can be operated on 230V three-phase supply with the same output power. For that, however, a change of the internal motor switching from delta to star connection is necessary.

Open the catalog to page 4
Flat gear type F105 - 5

Standard version With torque support Motor dimensions

Open the catalog to page 5
Flat gear type F105 - 8

Type 263.75 F105 with 80 W three-phase motor Technical data Output speed Output torque Transmission ratio Operating factor Radial force Order number Drawing of the terminal box (three-phase motor)

Open the catalog to page 8
Flat gear type F105 - 11

Output speed Output torque Transmission ratio Operating factor RadiaL force Order number Drawing of the terminal box (capacitor motor)

Open the catalog to page 11
Flat gear type F105 - 12

Heidrive GmbH Starenstra^e 23 D-93309 Kelheim Phone +49 9441/707-0 Fax +49 9441/707-259 info@heidrive.de www.heidrive.de Technical data subject to change! Last changes 01/2016

Open the catalog to page 12

All Heidrive GmbH catalogs and technical brochures

  1. Servo drives

    44 Pages

  2. Motor programs

    28 Pages

  3. SIL encoders

    2 Pages