Catalogs >
Hegewald & Peschke Meß- und Prüftechnik GmbH >
Universal testing machines Inspekt

Universal testing machines Inspekt
16Pages

Catalog excerpts

'iggr MeB- und Pruftechnik GmbH Inspekt Static electromechanical universal testing machines

A real universal testing machine should allow more than only a small amount of standard tests. Suitably equipped it should, if necessary, also be able to generate heat, cold and humidity into the laboratory. It should not only test standard specimen, but even the most extraordinary finished products and components. And be able for automation. Universal testing machines by Hegewald & Peschke are this universal. The series Inspekt fulfils highest demands in terms of measurement accuracy and versatility. It allows tensile, compression, bending or torsion tests, flexibly adapted to your test...

Open the catalog to page 2

Universal testing machine Inspekt 250 with hydraulic clamping devices and fully automatic extensometer Inspekt Inspekt Inspekt Inspekt Inspekt Inspekt Inspekt Height of test room (mm) without components 1,210 1,190 1,190 1,380 1,350 1,710 1,900

Open the catalog to page 3

Inspekt table Reliably manage medium loads. The series Inspekt table was developed for standard material and component testing in the medium-load range. It is ideally suitable for the material testing of synthetic material or non-ferrous metals as well as for the testing of smaller components, for example from the equipment technology. Inspekt table is available in six different versions regarding the load frame. The electromechanical drive with an alternating current motor and the power transmission by pretensioned recirculating ball screws free of play guarantees highest measuring...

Open the catalog to page 4

Universal testing machine Inspekt table 50 with safety door, wedge grips and a clip-on extensometer Inspekt Inspekt Inspekt Inspekt Inspekt Inspekt table 5 table 10 table 20 table 50 table 100 table 250 without components Optional: All load frames may be prolonged or broadened

Open the catalog to page 5

We have enhanced our testing machine series for the low load range. The inspekt solo impresses with an innovative brushless drive without gear transmission. This guarantees reduced noise pollution due to low motor speed and an optimised frequency range. The large machine base plate allows the assembly of accessories as well as the storage of tools and specimen, thus creating a compact workplace design. The newly developed tes Inspekt mini ting machine is available in three different test room heights and can thus be optimally adapted to individual requirements. inspekt inspekt inspekt solo...

Open the catalog to page 6

Hegewald & Peschke MeB- und Pruftechnik GmbH Our new universal testing machine series inspekt duo and inspekt blue replace the inspekt table blue inspekt duo and inspekt blue Advantages: • innovative brushless drive without gear transmission • reduced noise pollution due to low motor speed and optimized frequency range • freely selectable control of crosshead travel, load or strain • high-precision load measurement by strain gauge force transducer • compact workplace design • designed for both standing and seated work at the worktable due to very flat lower traverse and lateral arrangement...

Open the catalog to page 7

Inspekt environmental simulation From polar air to blast furnace. Universal testing machine Inspekt 250 with temperature chamber and video-extensometer

Open the catalog to page 8

There are seldom the same conditions in the real everyday life of a component or material like there are in the laboratory. In many cases these environmental conditions have such great influence on the expected test result that they have to be simulated in the smallest space, directly at the testing machine. Universal testing machine Inspekt table 50 with high-temperature furnace up to 1,200 °C For this Hegewald & Peschke offers environment simulators adapted specifically to the individual series of Inspekt: These include climatic chambers, temperature chambers, which can generate...

Open the catalog to page 9

Inspekt special testing machines A standard testing machine for the testing of complicated and unusual components or finished products is often not sufficient. Hegewald & Peschke develops and produces entirely individual testing machines for these cases. These client-oriented special solutions do not only have considerable test engineering advantages. Furthermore, they are often more cost-efficient and, thus, more than a mere alternative for the conventional test technique. With the development of special solutions, the clients profit from the proven and perfected basic construction of the...

Open the catalog to page 10

Special purpose machine for the draw bead test on body sheets Special purpose machine for determining the breaking strength of glass Special purpose machine for 90° peeling test of solar panels

Open the catalog to page 11

Inspekt automation solutions Entirely automatic. An increasing number of companies rely on fully automated testing machines for their materials, semi-finished products and end products. An automated test centre from Hegewald & Peschke offers high test speeds, operator independent evaluation and automated registration of the test results. The core of the plant is a universal testing machine of the type Inspekt. All the handling tasks necessary for the test procedure are undertaken by a fully automatically working six-axis robot. The specimen pass through several stations in the test centre...

Open the catalog to page 12

ment of the specimen in its original condition and during the experiment, where applicable, is done by a laser without direct contact – wear-free and precise. Sampling from the depot in the automated test centre Depots especially designed for the motor activity of the robot are used for the supply of the specimen. In these, a multitude of specimen, even in different versions, can be put to the test. At need, the testing machine works fully automated and without manual override in a 24-hour operation. Generally, the testing machine is equipped with double-sided hydraulic clamping devices....

Open the catalog to page 13

Inspekt service and modernisation For a long life of the testing machine. Hegewald & Peschke offers its clients wideranging services. One of the most important is the commissioning of the machine on-site with factory or DAkkS calibration and briefing of the operating personnel. Furthermore, thorough retraining in the application laboratory from Hegewald & Peschke or directly with the client is possible. Briefing of the operators at the commissioning Modernisation of a universal testing machine 10 kN according to variation 2 The clients can count on a free software-service during the entire...

Open the catalog to page 14