*mydirectindustry

Catalogs
Hegewald & Peschke Meß- und Prüftechnik GmbH
Torsion test stand inspekt T3500

Torsion test stand inspekt T3500

Product catalog summary

Product Overview: The document provides technical specifications for the Torsion Test Stand inspekt T3500 by Hegewald & Peschke, designed for vertical clamping of specimens.

Mechanical Design: The test stand features a lower drive unit at 650 mm height with a robust drive flange and multi-level gear assembly powered by an AC servo motor. It supports a nominal torsional moment up to 3500 Nm. Safety is ensured with electrically monitored doors and a pneumatic cylinder applying 5 kN against the specimen. The system includes manually adjustable height and angular measurement via a rotary encoder.

Standard Functions: The test stand offers torque, angle, or external signal measurement, overload protection, automatic torque calibration, specimen failure detection, and a return function. A handheld panel allows for precise manual positioning.

Test Room Dimensions: The testing room has a width/diameter of 500 mm and a maximum specimen installation height of 700 mm.

Rotational Speed: Testing speed ranges from 0.005 to 2 rotations per minute, with rotations executed up to 360°.

Torque Measurement: The measuring range is 0.4% to 100% of the nominal load, with a resolution of +/-100,000 digits at a 20ms integration time.

Rotation Angle Measurement: Features incremental rectangular input with sensor monitoring and position storage, with an angle resolution of less than 0.01°.

Dimensions and Weights: The torsion test stand measures approximately 900 mm x 750 mm x 2600 mm and weighs 480 kg. The controller measures 290 mm x 290 mm x 650 mm and weighs 35 kg.

Data Transmission: Utilizes USB 2.0 or LAN interface with a standard data transmission rate of 50 Hz to PC, with options for higher frequencies using special software. Internal data processing rate is 1 ms.

Connection Requirements: Requires 115/230 VAC, 2.0 kVA, 50/60 Hz, with operating conditions of 5-40°C and 20-80% humidity. Compressed air at 6 bar is also needed.

Included Accessories: Comes with a handheld panel RMC7 with load-position display and a guard door with electronic monitoring.

Optional Accessories: Includes a load cell (necessary for operation), testing software LabMaster, and a PC with a screen.

Catalog excerpts

Hegewald & Peschke Product Information test stand with vertical clamping of the specimens Torsion test stand inspekt T3500 Hegewald & Peschke, MeB- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telefon: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.Hegewald-Peschke.com

Open the catalog to page 1

Hegewald & PeschkeMeR- und Pruftechnik GmbH technical data Your contact person

Open the catalog to page 2

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list