Catalogs >
Hegewald & Peschke Meß- und Prüftechnik GmbH >
Tool box universal furniture test rigs

Tool box universal furniture test rigs
8Pages

Catalog excerpts

Tool box universal furniture test rigs - 1

Product information Universal test rigs for furniture and component testing with Calmar pro The software-based control concept for flexible and complex test tasks Hegewald & Peschke Meft- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen, Germany Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: info@Hegewald-Peschke.de http://www.Hegewald-Peschke.com

Open the catalog to page 1

Tool box universal furniture test rigs - 2

Calmar pro test rigs General product description The universal test rig concept of the Calmar pro series by Hegewald & Peschke is designed for flexible furniture and component testing. In addition to durability tests, dynamic and static load tests, functional tests as well as standard-compliant simulations of the product life cycle according to DIN EN ISO, BIFMA, BS, NEN, GB, GOST, etc. can be carried out. On the basis of this tool box your individual "all-rounder" can be configured, depending on the test object and test task. The decentralized, modular control concept enables test...

Open the catalog to page 2

Tool box universal furniture test rigs - 3

The size of the test frame depends on the customer requirements and on the specifications of the standard^) according to which the respective testing task must be fulfilled. We offer various sizes for this purpose. If the test rig exceeds the specified sizes, special designs with horizontal or vertical additional modules are also possible. Additional roller-guided profiles can be used to fix the test axes and mount accessories and specimens. The upper profiles of the test frame are available in 2 heights. The profile selection is designed in such a way that on the one hand a high stiffness...

Open the catalog to page 3

Tool box universal furniture test rigs - 4

rfd) Hegewald & Peschke^23^- Mel3- und Pruftechnik GmbH test rigs Test axes (selection) The control board and the proportional valve are located directly on the test axis. This reduces compressed air consumption. A further advantage of this design is the resulting precise and fast control behaviour due to the shorter distances between the control valve and the point of impact. The test axis contains a manual operation for setup and a key switch for manual on/off switching of the axis. Each axis needs 1 mounting bracket. The a dvantage of position-controlled systems over purely...

Open the catalog to page 4

Tool box universal furniture test rigs - 5

Control/supply terminal and software The supply terminal is used to connect either up to 2 or up to 5 test axes. It converts the CAN protocol to USB and simultaneously establishes the connection from the test axes to the PC. The supply terminal consists of the control electronics (closed-loop control), the switch cabinet housing and the pneumatic maintenance unit and is mounted on a separate rack. The central connections for the compressed air and power supply are also located here. Accessories We will be pleased to provide you with our separate accessory brochures on drop weights, load...

Open the catalog to page 5

Tool box universal furniture test rigs - 6

Calmar pro test rigs One configuration - many possibilities The universal tool box system enables the realization of many applications with only one test rig. Depending on customer requirements, the test rig can be individually equipped and configured. The pictures below show the same test rig with 3 different application possibilities. In all three cases it consists of a test frame, 4 test axes and a drop tester. The test axes are used for different testing tasks depending on the application. 2 test axes for the armrest testing 1 test axis for the seat testing 1 test axis for the backrest...

Open the catalog to page 6

Tool box universal furniture test rigs - 7

Calmar pro test rigs /IjJn Hegewald & PeschkeMeB- und Pruftechnik GmbHApplication-oriented complete test rigs to choose from and as an example Item no.

Open the catalog to page 7

Tool box universal furniture test rigs - 8

Service Hegewald & Peschke offers comprehensive services to its customers. One of the key services is commissioning of the machine on site with calibration and instruction of the operating personnel. Regular calibration of the test equipment guarantees the reliability of measuring results and serves as basis of measuring and test equipment monitoring in quality assurance measures. Different test tools, such as the seat impactor or the biting tester, are supplied as standard with calibration certificate. The calibration laboratory from Hegewald & Peschke is accredited according to DIN EN...

Open the catalog to page 8