Catalogs >
Hegewald & Peschke Meß- und Prüftechnik GmbH >
Tool box Calmar One for furniture test rigs

Tool box Calmar One for furniture test rigs
8Pages

Catalog excerpts

Tool box Calmar One for furniture test rigs - 1

Product information Universal test rigs for furniture and component testing with Calmar one The PLC-based system with easy handling for simple test tasks Hegewald & Peschke MeK- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen, Germany Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: info@Hegewald-Peschke.de http://www.Hegewald-Peschke.com

Open the catalog to page 1

Tool box Calmar One for furniture test rigs - 2

Calmar one test rigs rfd) Hegewald & Peschke^23^- Mel3- und Pruftechnik GmbH General product description The universal test rig concept of the Calmar one series by Hegewald & Peschke is designed for standard-compliant furniture and component testing according to DIN EN ISO, BIFMA, BS, NEN, GB, GOST, etc. In addition to durability tests, dynamic and static load tests, both functional tests and simulations of the product life cycle can be carried out. Depending on the specimen and test task, an individual test rig can be configured for your specific test task on the basis of this tool box....

Open the catalog to page 2

Tool box Calmar One for furniture test rigs - 3

Calmar one test rigs You can configure your test rig in 4 simple steps: Test frame • Base frame • Pedestal (for uneven ground) • Additional profiles (horizontal und vertical) as well as cross girders Test axes • Pneumatic test axes with different measurement sensors and control (load/position) as well as different load ranges and strokes possible • Adaption on test frame with mounting brackets Accessories • Various load pads and fixing elements depending on the test standard and test application Control Calmar one • Selection of control mode (load/position) and test axes

Open the catalog to page 3

Tool box Calmar One for furniture test rigs - 4

Calmar one test rigs /Ids Hegewald & PeschkeMeB- und Pruftechnik GmbHTest frame The size of the test frame depends on the customer requirements and on the specifications of the standard^) according to which the respective testing task must be fulfilled. We offer various sizes for this purpose. If the test rig exceeds the specified sizes, special designs with horizontal or vertical additional modules are also possible. Additional roller-guided profiles can be used to fix the test axes and mount accessories and specimens. The upper profiles of the test frame are available in 2 heights. The...

Open the catalog to page 4

Tool box Calmar One for furniture test rigs - 5

Pneumatic test axes Test axis Item no. Mounting accessories Mounting bracket Item no. 40-001-419 40-001-429 40-001-439 Mounting bracket for the adaption of the test axis on the test fra me Hand winch for easy height positioning HP of horizontal actuators The easy adjustment of the angle as well as the flexible or rigid bearing are an advantage of the mounting brackets. In addition, the fixing elements allow free positioning of the test axes over the profile length in height or width. The actuator or swivel axis can be arranged parallel or perpendicular to the profile. Further accessories...

Open the catalog to page 5

Tool box Calmar One for furniture test rigs - 6

Accessories We will be pleased to provide you with our separate accessory brochures on drop weights, load pad (round and special shapes) and fixing elements on request. Below you will find some examples. Accessories for chair testing (selection) Load pads for table testing (selection) Fixation elements (selection) Stop element for Clamping bridge for office swivel chairs office swivel chairs

Open the catalog to page 6

Tool box Calmar One for furniture test rigs - 7

Calmar one test rigs Application-oriented complete test rigs to choose from and as an example The following test rigs have been designed according to the tool box principle. However, they offer the convenience of a finished product, which is designed for concrete testing tasks and already contains all necessary components, such as frames, additional profiles, test axes, mounting accessories, control and further accessories. Item no. Universal test rig for tables and couches, consisting of: 3 pneumatic test axes load-controlled Dimensions: LxWxH: 2400x2400x2000 [mm] Universal test rig for...

Open the catalog to page 7

Tool box Calmar One for furniture test rigs - 8

Service Hegewald &l Peschke offers comprehensive services to its customers. One of the key services is commissioning of the machine on site with calibration and instruction of the operating personnel. Regular calibration of the test equipment guarantees the reliability of measuring results and serves as basis of measuring and test equipment monitoring in quality assurance measures. Different test tools, such as the seat impactor or the biting tester, are supplied as standard with calibration certificate. The calibration laboratory from Hegewald & Peschke is accredited according to DIN EN...

Open the catalog to page 8