*mydirectindustry

Catalogs
Hegewald & Peschke Meß- und Prüftechnik GmbH
Shock test stand

Shock test stand

Product catalog summary

Device Overview: The document describes a device designed for conducting shock tests on solar modules in compliance with the EN 61730-2 standard. The modules are mounted vertically on a transport trolley, which is then fixed to the testing device's frame.

Components:

Frame: The frame is anchored to the ground and wall, using shear connectors for stability. It includes quick releases for securing the trolley, ensuring the impact point is centrally located.
Carrier System: This system facilitates the lateral movement of the impact object, allowing easy positioning of the trolley. It includes two horizontal carriers at a height of 4.1 meters, equipped with cable winches for adjusting the impact object's position and amplitude.
Impact Object: The impact object is designed according to the standard's specifications, with a marked center of gravity for visual control. It features a release mechanism operated by a Bowden cable, and displays for setting up deflection accurately.

Installation Requirements:

A minimum ceiling height of 4.5 meters is necessary.
Anchoring holes in the floor and wall are required, but their placement costs are not covered by the manufacturer.
Electro hoists are used for cable winches, with controls centrally located on the wall.

Operational Notes:

The setup has been modified for safety, replacing the lifting of the impact object with lateral displacement.
Impact energy at stage three of testing is influenced by the wire length, affecting the drop height.

Catalog excerpts

Hegewald & Peschke Product Information Hegewald & Peschke, MeB- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telefon: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.Hegewald-Peschke.com

Open the catalog to page 1

This machine allows shock tests for solar modules according to the standard EN 61730-2. The modules have to be fixed vertically on a transport trolley, which has been equipped with an appropriate support for fixation on the frame of the testing device. The test bench consists of the following components: 1.) Frame (standing firm on the ground and fixation of the upper bearers) Main measurements are according to the standard EN 61730-2. The vertical supports (to which the modular tool holder is attached) are anchored in the floor. The upper supports which hold the carrier system (see 2.) are anchored...

Open the catalog to page 2

Shock test stand

Shock test stand

Catalog excerpts

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

Archived catalogs