Catalogs >
Hegewald & Peschke Meß- und Prüftechnik GmbH >
Length measuring machine

Length measuring machine
6Pages

Catalog excerpts

Hegewald & Peschke, MeO- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-mail: info@Hegewald-Peschke.de http://www.Hegewald-Peschke.com

Open the catalog to page 1

General product description The 1D measurement device “light” serves for the length measurement of long, narrow workpieces in the productions environment. This product offers a cost-effective alternative exactly for such measurement tasks where a sliding calliper is too short and a measuring tape is too inaccurate. With the 1D measurement device “light”, linear dimensions can be gathered quickly and reliably in the simplest manner. The concept of the new series “8” places great importance on flexibility and cost effectiveness. Essential characteristics • Light-weight, cost-effective...

Open the catalog to page 2

1D measurement device - basic device Universal basic device, consisting of: Basic carrier made of light metal with T-grooves and linear guiding. Movable measuring carriage (for attaching of stops, gauges, optics etc.). Magnetic incremental measuring system Magnescale® SL130/PL20C. Factory calibration with protocol. Measuring accuracy: ± (0.06mm + 0.02mm x L), L = measuring length in m Without display device and accessories (required for operation). Item no. Width Measuring length Accessories Display devices and software Display unit LG20-1: Magnescale® Display unit with reset/pre-set...

Open the catalog to page 3

Workpiece supports/clamping Device with measurement accessories Depending on requirements, the workpiece supports of the "5" series can be easily and flexibly combined for different specimen and measuring lengths: Fixed / reference stopsItem no. Article description Design/application 33-011-805 Fixed stop 5 Universal fixed stop with wide touching surface. Suitable for tubes up to D = 150 mm and many other profile shapes. Attached to the basic carrier. 33-011-806 Fixed stop 90° special Prismatic shape 90° for rectangular workpieces up to 100x100 mm, including fastening parts for fixing to...

Open the catalog to page 4

Accessories for workplace equipment An ergonomically designed workplace with purposeful equipment is the basis for an efficient performance of tasks. In order to facilitate for you the design of your new measuring workplace as well as the procurement from a single source, we gladly offer you the suitable accessories from the portfolio of the German manufacturer "RAU. Arbeitsplatzeinrichtungen”. If a workbench is ordered together with a measurement device, then the required fastening bores are drilled into the work plate at the factory. Workbench Work plate made of solid beech wood,...

Open the catalog to page 5

Hegewald & PeschkeMelB- und Pruftechnik GmbH Workbench with lowerable running gear Workplate made of solid beech wood, glue-laminated finger joint, and thickness: 40 mm, surface protection by use of environ-mentally-friendly refined linseed oil. Welded construction for high stability and load capacity. 2 Bock- and 2 steering rollers with locking device. Roller 0 125 mm, design height 150 mm. Distributed load: max. 1250 kg, in extended position max. 450 kg. Powder-coating white aluminium (RAL9006) Monitor housing Suitable for monitors up to 26 inches. Lockable monitor compartment (inside...

Open the catalog to page 6