Hydraulic Universal Testing Machine Inspekt 500-H

Product catalog summary

Product Overview: The document provides detailed technical specifications for the Hydraulic Universal Testing Machine Inspekt 500-H by Hegewald & Peschke, designed for testing up to 500kN load.

Technical Specifications:

Load Capacity: 500kN
Design: Features a lower crosshead guided by two fixed spindles, an upper crosshead connected to the machine table, and a hydraulic unit with an oil pump and servo valve.
Testing Rooms: Two rooms with dimensions of 650mm width, 650mm depth, and 900mm height, with a test stroke of 250mm.
Measuring Range: Load measurement with a high-precision load cell, ranging from 0.4% to 100% of nominal load, with a resolution of +/- 180,000 digits.
Speed Range: Stroke speed of 80mm/min and positioning speed of 400mm/min.
Power Ratings: 3P/PE/400V/50Hz, 2.0kVA, suitable for 5-40°C and 20-80% humidity.

Standard Functions:

Load, position, and extension control
Over-load protection and automatic load calibration
Manual mode operation with a handheld panel
Sample failure detection and return function

Software and Data Transfer: USB 2.0 or LAN interface with a standard data transfer rate of 50Hz, with options for higher rates.

Optional Features: Additional measuring channels and clamping tools for tensile and pressure tests.

Dimensions and Weight:

Machine: 960 x 660 x 2400mm, 1700kg
Controller: 600 x 600 x 1900mm, 200kg

Catalog excerpts

Hydraulic Universal Testing Machine Inspekt 500-H-1

zertifiziert nach DINEN ISO 9001 Hegewald & Peschke, Mel@ und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen, Germany Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.hegewald-peschke.com

Open the catalog to page 1

Hydraulic Universal Testing Machine Inspekt 500-H-2

Hegewald & PeschkeW/AUW MeB- und Pruftechnik GmbH Technical data:

Open the catalog to page 2

Hydraulic Universal Testing Machine Inspekt 500-H-3

Hegewald & PeschkeW/AUW MeB- und Pruftechnik GmbH • Return function • Precise manual positioning of the crosshead setup operation with handheld panel Software interface Data transfer rate Data transfer rate to PC: 50Hz (standard) optionally higher rate with a special software add on-module Internal data-processing rate: 2ms Optional measuring channels max. 1 free slot for additional boards (1-channel analogue boards or 2-channel digital boards) for additional sensors Integrated or incl. clamping tools Tensile test Max. clamp distance 900mm, self-clamping wedge type grips for round specimens...

Open the catalog to page 3