*mydirectindustry

Catalogs
Hegewald & Peschke Meß- und Prüftechnik GmbH
Furniture testing - Threshold test

Furniture testing - Threshold test

Product catalog summary

Overview: The document provides detailed information about a testing device designed for threshold tests, compliant with standards such as ES 1058 and BIFMA X5.1, specifically the Calmar I series.

Specifications: The device includes a base plate measuring 1,000 mm x 2,000 mm with a plywood and stainless steel surface, three removable thresholds, and an electromotive linear actuator with a constant stroke of 762 mm. It requires a power connection of 230VAC, 50 Hz, with control accuracy of ±1% of the maximum value, position resolution of 0.5 mm, and position accuracy of ±1 mm.

Application: The device is used for threshold tests, requiring the specimen to be clamped with an adjustable clamping device. The maximum load transmission height is 400 mm above ground, and the device must be anchored to the floor. It operates at a constant speed of 10±2 strokes per minute.

Operation: The device features a touch panel for test parameterization, allowing users to set parameters such as cycle amount, time intervals, and maximum/minimum values. The system is based on a PLC with data export functionality, enabling real-time status monitoring and test data export for reporting.

Safety and Shutdown: The device remains closed during tests, automatically shutting down upon specimen failure, which is detected indirectly when weights are dropped.

Options: Additional options include a computer and monitor for data export, a remote maintenance module, and weights for threshold tests.

Catalog excerpts

Hegewald & Peschke Tj^^f MeR- und Pruftechnik GmbH Product Information Testing device for threshold tests e.g. acc. to ES 1058 and BIFMA X5.1; Calmar I series zertifiziert nach Hegewald & Peschke, Mel5- und Pruftechnik GmbH E-Maih [email protected]

Open the catalog to page 1

Application: threshold tests according to the Haworth standard ES 1058 or BIFMA X5.1 observed. At test end the control saves automatically all for the documentation necessary parameter and allows the export of the data to a computer for test reporting. The testing device consists of: • The specimen is clamped with a height-adjustable clamping device. The distance to the drive unit can also be adjusted. The maximum height of load transmission is 400 mm above ground. For such tests it is necessary to anchor the testing device to the floor. The device can be applied for tests up to constant speed...

Open the catalog to page 2

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list