Furniture testing - Single test rigs - Universal testing machine for furniture components

Product catalog summary

Product Overview
The universal testing machine from Hegewald & Peschke is designed for testing X-bases, furniture components, and various materials such as metals, plastics, wood, foamed plastics, and fabrics. It features a 20kN load cell, support plate, pressure plate, and stand, all enclosed in a robust and transparent protective casing.

Technical Specifications

Load Capacity: 20,000 N
Testing Speed: 0.01 – 600 mm/min
Test Space Dimensions: 750 x 750 x 1000 mm
Machine Dimensions: 1015 x 850 x 2200 mm
Controller Dimensions: 290 x 290 x 650 mm
Weight: UTM - 300 kg, Controller - 20 kg
Electrical Connection: 115/230 VAC, 50/60 Hz

Features

Standardised connector system for easy tool exchange
Manual and fully automatic testing options
Block-programme for hold times and multiple loading sequences
USB 2.0 or LAN data processing interface

Applications
The machine is suitable for testing furniture parts and materials under static, increasing, or dynamic loads. It is used in development and quality control during batch production. It can test X-bases, armrests, swivel chairs, foamed materials, upholstery fabrics, and perform tensile, pressure, and bending tests on various materials.

Optional Accessories
Special clamping tools for various components and materials are available.

Catalog excerpts

Furniture testing - Single test rigs - Universal testing machine for furniture components-1

Hegewald & Peschke V^^J MeB- und Prijftechnik GmbH Product Information Universal testing machine for furniture components and other various materials zertifiziert nach Hegewald & Peschke, Mel5- und Pruftechnik GmbH E-Maih [email protected]

Open the catalog to page 1

Furniture testing - Single test rigs - Universal testing machine for furniture components-2

The universal testing machine Inspect table 20kN allows for the testing of X-bases, furniture components, and other various materials (metals, plastics, wood, foamed plastics, fabrics). The machine includes a load cell for 20kN, a support plate for X-bases, a pressureplate and a stand. The test space is extra wide and surrounded by a very robust and highly transparent protective enclosure, which allows for exact tracing of the testing procedure until the specimen fails. The standardised connector system enables quick and easy exchange of the different testing tools for tensile, pressure, shear,...

Open the catalog to page 2