*mydirectindustry

Catalogs
Hegewald & Peschke Meß- und Prüftechnik GmbH
Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture

Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture

Product catalog summary

Overview: The document provides information about a combined test rig designed by Hegewald & Peschke for testing position adjustments of fittings on bedframes, upholstered, and seating furniture. The test rig is compliant with standards EN 1725, EN 1727, EN 15338, and DIN 68898.

Specifications:

The test rig is used for testing the mechanics of headboards, height adjustments for headrests, and locking functions on functional fittings.
It includes a drop tester for loading fittings and is controlled by a central supply terminal capable of connecting up to 5 pneumatic or electrical test axes.
Technical data includes a drop tester with a load of 136 kg and a drop height of 500 mm, a pneumatic actuator with 500 N force and 600 mm stroke, and a swivel unit with 1000 Nm torque and ±90° rotation.
The load measuring range is 0 – 2 kN, and torque measuring range is 0 – 1000 Nm. Position resolution is less than 0.1 mm with a maximum measuring range of 500 mm.
Electrical connection requires 400V/50Hz, and compressed-air supply is between 6 to 8 bar.
Dimensions for transport are 1300 x 3600 x 2200 mm, and installed dimensions are 1300 x 3600 x 3000 mm. The weight is 1300 kg.

Software and Control: The LabControl software allows flexible parameter entry, execution of various testing procedures, graphical representation of measured values, test evaluation, and logging. The number of cycles and testing procedures can be set arbitrarily, and measured values can be recorded or used as control variables.

Applications: The test rig is applicable for testing functional fittings on bedframes, seating, and upholstered furniture with maximum dimensions of 2.0 m x 1.2 m x 0.3 m.

Optional Accessories: Available upon request.

Catalog excerpts

Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture-1

Hegewald & Peschke Product Information Combined test rig for position on bedframes, upholstered and seating furniture zertifiziert nach Hegewald & Peschke, Mel5- und Pruftechnik GmbH E-Maih [email protected]

Open the catalog to page 1

Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture-2

The test rig tests position adjustments on different fittings acc. to EN 1725, EN 1727, EN 15338 and DIN 68898. Applications include, for example, adjusting mechanics for the headboards of beds, different height adjustments for head rests of seating and upholstered furniture, and the locking function on functional fittings. A drop tester is used for the loading of the fittings. The entire system is controlled by a central supply terminal, which can connect up to 5 pneumatic or electrical test axes. The extensive testing and evaluation software LabControl allows for a flexible parameter entry,...

Open the catalog to page 2

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list