- Catalogs
- Hegewald & Peschke Meß- und Prüftechnik GmbH
- Furniture testing - Single test rigs - 3D-measurement device for chairs
- Products
- Catalogs
- News & Trends
- Exhibitions
Furniture testing - Single test rigs - 3D-measurement device for chairs
Furniture testing - Single test rigs - 3D-measurement device for chairs
- The device complies with standards such as EN 1335, EN 1728, EN 1729, EN 581-2-3, EN 13761, DIN 68878, and BIFMA X5.1.
- It features a moveable 4-column portal frame with a base plate measuring 1200mm x 1200mm and 12mm thick, zinc-plated with a borehole pattern.
- Includes a pneumatic stroke cylinder device for positioning the seat shape, with a maximum lifting height of 500mm.
- The seat shape conforms to DIN 4551 and EN 1335-1 standards, weighing 64 kg.
- Three separately moveable measuring axes with locks and a counterweight on the vertical axis.
- Equipped with three digital measurement devices for determining seat dimensions according to standards, including distance measurement.
- Vertical measuring range from 300mm to 1100mm above the base plate, allowing for both difference and absolute height measurements.
- Horizontal measuring range of ±500mm from the middle, allowing for both difference and absolute distance measurements to the middle.
- A swivelling control cabinet with a display for each of the three measuring axes.
- Fasteners are included for securing chairs, swivel chairs, and cantilever chairs during testing.
Catalog excerpts
Hegewald & Peschke Product Information with integrated lifting equipment for the seat weight zertifiziert nach Hegewald & Peschke, Mels- und Pruftechnik GmbH E-Maih [email protected]
Open the catalog to page 1
3D measurement device for swivel chairs, chairs, stools, armchairs and cantilever chairs acc. to EN 1335, EN 1728, EN 1729, EN 581-2-3, EN 13761, DIN 68878 und BIFMA X5.1, with integrated pneumatic lifting equipment for the seat weight. Based on the indication of positions in the testing procedures it is possible to mark the load loci on the specimen with the help of this measurement device. 1 frame (with base plate) constructed as 4 column portal, moveable 1 base plate 1200mm x 1200mm, 12mm thick, zinc-plated, borehole pattern 1 pneumatic stroke cylinder device for the easy positioning of the...
Open the catalog to page 2All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures
Testing of foam materials4 Pages
Torsion test machine2 Pages
Temperature chambers4 Pages
Length measuring machine6 Pages
Electromechanical test axes4 Pages
Test rig for tables2 Pages
Friction test stand2 Pages
Stone impact tester2 Pages
Material testing on textiles4 Pages
Creep testing device2 Pages
Drop weights for drop test3 Pages
arm rest load pad2 Pages
additive weights2 Pages
Creep bending test device2 Pages
High temperature furnaces4 Pages
Calibration machine 2500 kN2 Pages
Wedge type grips3 Pages
Torsion testing devices4 Pages
Universal linear module2 Pages
Ladder test stand3 Pages
Brinell hardness tester2 Pages
Magnescale Digital gauge catalog24 Pages
Shock test stand2 Pages
Load pads for arm rests2 Pages
Friction test stand2 Pages
Archived catalogs
Hydraulic grips 250kN2 Pages
- Kiln
- Test machine
- Chamber kiln
- Measuring device
- Test cabinet
- Electric furnace
- Test stand
- Measuring machine
- Temperature test chamber
- Material test machine
- Automated testing machine
- Calibration system
- Indentation hardness tester
- Computer-controlled test machine
- Compression testing machine
- Benchtop hardness tester
- Laboratory kiln
- Industrial testing machine
- Vertical testing machine
- Automated test bench