*mydirectindustry

Catalogs
Hegewald & Peschke Meß- und Prüftechnik GmbH
Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs

Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs

Product catalog summary

Overview: The document provides detailed information about a double alternating bending test rig designed for seat, backrest, and side-to-side tests. It is manufactured by Hegewald & Peschke, Meß- und Prüftechnik GmbH and complies with various standards including EN 1335, EN 581-2-3, EN 1728, DIN 68878, and BIFMA X5.1.

Specifications: The test rig features a broad base plate and enhanced clamping devices, allowing for simultaneous testing of two chairs or side-to-side tests. It includes four test axes, each with its own controller, operated via a PC through a CAN-bus system. The rig is equipped with a central supply terminal capable of supporting up to five pneumatic test axes.

Components Included:

A framework with a traverse member and a galvanised steel base plate.
Two electrical stroke systems for height adjustment.
One pneumatic test axis for seat testing, load-controlled with a piston diameter of 80mm and a stroke of 500mm.
One pneumatic test axis for backrest testing, load-controlled with a piston diameter of 63mm and a stroke of 500mm.
Two pneumatic test axes for side-to-side testing, each with a piston diameter of 63mm and a stroke of 500mm.
Four integrated load cells, each with a capacity of 5kN.
Emergency stop buttons on each test axis.
Various load pads and fastening elements for specimen testing.

Supply Terminal: The supply terminal acts as a connector for up to five test axes, converting CAN-protocol to USB for PC connection. It includes a central emergency stop and air conditioning components.

Framework for Supply Terminal: Made from aluminium profiles, this framework is designed to hold the supply terminal, PC, keyboard, and screen. It is moveable and can be used as a stationary system.

Accessories: Includes components for CAN-Bus and PC connection via USB interface.

Not Included: The document specifies that a PC with accessories and testing software are not included.

Catalog excerpts

Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs-1

Hegewald & Peschke Product Information double alternating bending test rig for seat/backrest and Side to Side Test, 4 test axes zertifiziert nach DINEN ISO 9001 Hegewald & Peschke, MeB- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telefon: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.Hegewald-Peschke.com

Open the catalog to page 1

Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs-2

Hegewald & PeschkeMeR- und Pruftechnik GmbH Double test rig for alternate bending tests seat, backrest and Side-to-Side tests according to EN 1335, EN 581-2-3, EN 1728, DIN 68878, BIFMA X5.1, load or load/position controlled. Because of the broadening of the base plate and the enhancement of the clamping devices this test rig can be used either for the simultaneous seat/backrest testing of two chairs or for Side to Side tests. The test axes each have their own controllers assembled in the immediate vicinity, which are operated from a PC via CAN-bus and work synchronised. They are supplied via...

Open the catalog to page 2

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list