Product Information Test stand for cable-controlled gearshift 1 electromechanical actuator 1000N force/displacement controlled Hegewald & Peschke Meft- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen, Germany Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.Hegewald-Peschke.com

(JB) Hegewald & PeschkeMeB- und Pruftechnik GmbH Test task: Vertical and horizontal testing of cable pulls for gearshifts Possible tests with the software LabMaster: • Static and cyclic compression/tensile tests (e.g. compression test on the shift lever to determine the actuation path for unlocking the locking mechanism) • Determination of inherent friction • Limit load tests • Displacement-clearance-measurements in switching and selection direction • Efficiency assessment The H&P test software allows complete control of the machine, display of measured data, calculation of test results and data...

(JB) Hegewald & PeschkeMeB- und Pruftechnik GmbH Mechanical construction: • Column to accommodate the actuator which can be positioned anywhere along the entire length of the table top. The clamping fixture for the actuator can be adapted in height. • 1 electromechanical test axis force/displacement controlled, stroke 200mm, test force up to 1000N, 3 load cells The test axis is mounted on the side of the column in such a way that it can be swivelled manually so that testing can be carried out in any direction from vertical downwards to horizontal. The swivel axis is locked by a star grip. • Displacement...

Further information at www.hegewald-peschke.com: Page 4 / 4 Test stand for cable-controlled gearshift: https://www.youtube.com/watch?v=V16RZ9SjOTQ