Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Hegewald & Peschke Meß- und Prüftechnik GmbH
  3. 1D heavy length measurement devices, fixed to floor

1D heavy length measurement devices, fixed to floor
1 /2Pages

1D heavy length measurement devices, fixed to floor

1D heavy length measurement devices, fixed to floor
1 /2Pages

Catalog excerpts

1D heavy length measurement devices, fixed to floor-1

^|pr MeB- und Pruftechnik GmbH Hegewald & Peschke, MeB- und Pruftechnik GmbH Am Grundchen 1, 01683 Nossen Telefon: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: [email protected] http://www.Hegewald-Peschke.com

 Open the catalog to page 1
1D heavy length measurement devices, fixed to floor-2

General Product description Our very robust 1D measuring device is a digital length measuring device made of steel and is used for length measurement on rod-shaped workpieces, tubes, profiles, rods, blanks, etc. in production environments. For measuring tasks where accurate measurements are a challenge, we offer a cost-effective alternative with this product. With the 1D-measuring device we guarantee a safe and fast measurement with easy operation in a rough production environment. sichere und schnelle Messung bei einfachster Bedienung im rauen Produktionsumfeld schneller Tausch der Wechsel-Messbacken...

 Open the catalog to page 2

All Hegewald & Peschke Meß- und Prüftechnik GmbH catalogs and technical brochures

  1. Testing of foam materials
    Testing of foam materials

    4  Pages

  2. Torsion test machine
    Torsion test machine

    2  Pages

  3. Torsion testing device TW-500H
    Torsion testing device TW-500H

    2  Pages

  4. Test device for pendulum stroke tests
    Test device for pendulum stroke tests

    2  Pages

  5. Load template ecc. to EN 1022, ISO 7173, EN 1728
    Load template ecc. to EN 1022, ISO 7173, EN 1728

    2  Pages

  6. Determination of the properties of deep-drawn sheets
    Determination of the properties of deep-drawn sheets

    3  Pages

  7. Screw type wedge action grips 250kN
    Screw type wedge action grips 250kN

    4  Pages

  8. Temperature chambers
    Temperature chambers

    4  Pages

  9. Electromotive linear axes for the testing of rotary doors, sliding doors, roller doors, filing cabinets and drawers e.g. according to EN 14749, EN 14074, EN 1335-3, ES 1058 und BIFMA X5.1
    Electromotive linear axes for the testing of rotary doors, sliding doors, roller doors, filing cabinets and drawers e.g. according to EN 14749, EN 14074, EN 1335-3, ES 1058 und BIFMA X5.1

    4  Pages

  10. Universal testing machines series inspekt table 10 kN up to 250 kN
    Universal testing machines series inspekt table 10 kN up to 250 kN

    4  Pages

  11. Length measuring machine
    Length measuring machine

    6  Pages

  12. Bending fatigue testing machine
    Bending fatigue testing machine

    2  Pages

  13. Electromechanical test axes
    Electromechanical test axes

    4  Pages

  14. DETERMINATION OF MECHANICAL PROPERTIES ON CFRP SAMPLES
    DETERMINATION OF MECHANICAL PROPERTIES ON CFRP SAMPLES

    2  Pages

  15. Bending testing machine for glass
    Bending testing machine for glass

    2  Pages

  16. Modernisation of universal testing machines
    Modernisation of universal testing machines

    4  Pages

  17. Universal testing machine inspekt table 50 kN-1
    Universal testing machine inspekt table 50 kN-1

    4  Pages

  18. Universal testing machine inspekt table 250 kN
    Universal testing machine inspekt table 250 kN

    4  Pages

  19. Universal testing machine inspekt table 100 kN
    Universal testing machine inspekt table 100 kN

    4  Pages

  20. Universal testing machine inspekt table 50 kN
    Universal testing machine inspekt table 50 kN

    4  Pages

  21. Universal testing machine inspekt table 20 kN
    Universal testing machine inspekt table 20 kN

    4  Pages

  22. Universal testing machine inspekt table 10 kN
    Universal testing machine inspekt table 10 kN

    4  Pages

  23. Universal testing machine inspekt table 5 kN
    Universal testing machine inspekt table 5 kN

    4  Pages

  24. Universal testing machine inspekt solo
    Universal testing machine inspekt solo

    4  Pages

  25. Universal testing machine Inspekt duo 5-10kN
    Universal testing machine Inspekt duo 5-10kN

    4  Pages

  26. Universal testing machine inspekt blue 30kN
    Universal testing machine inspekt blue 30kN

    4  Pages

  27. Universal testing machine inspekt 250 kN
    Universal testing machine inspekt 250 kN

    4  Pages

  28. Universal testing machine inspekt 400 kN
    Universal testing machine inspekt 400 kN

    4  Pages

  29. Universal testing machine inspekt 1200 kN
    Universal testing machine inspekt 1200 kN

    4  Pages

  30. Universal testing machine inspekt 600 kN
    Universal testing machine inspekt 600 kN

    4  Pages

  31. Universal testing machine inspekt 1500 kN
    Universal testing machine inspekt 1500 kN

    4  Pages

  32. Universal testing machine inspekt 200 kN
    Universal testing machine inspekt 200 kN

    4  Pages

  33. Universal testing machine inspekt 150 kN
    Universal testing machine inspekt 150 kN

    4  Pages

  34. Universal testing machine inspekt 100 kN
    Universal testing machine inspekt 100 kN

    4  Pages

  35. Impact tester for composites and textiles
    Impact tester for composites and textiles

    4  Pages

  36. Component test stand for cable-controlled gearshifts
    Component test stand for cable-controlled gearshifts

    4  Pages

  37. Test rig for tables
    Test rig for tables

    2  Pages

  38. Material testing software LabMaster
    Material testing software LabMaster

    7  Pages

  39. Universal testing machines Inspekt
    Universal testing machines Inspekt

    16  Pages

  40. Friction test stand
    Friction test stand

    2  Pages

  41. Stone impact tester
    Stone impact tester

    2  Pages

  42. Torsion test stand inspekt T3500
    Torsion test stand inspekt T3500

    2  Pages

  43. Vickers hardness tester up to 1500°C
    Vickers hardness tester up to 1500°C

    7  Pages

  44. Tool box universal furniture test rigs
    Tool box universal furniture test rigs

    8  Pages

  45. Tool box Calmar One for furniture test rigs
    Tool box Calmar One for furniture test rigs

    8  Pages

  46. Material testing on textiles
    Material testing on textiles

    4  Pages

  47. Mechanical testing of elements of microsystems technology
    Mechanical testing of elements of microsystems technology

    29  Pages

  48. Material Testing on Plastics and Composites
    Material Testing on Plastics and Composites

    40  Pages

  49. Screw type wedge action grips 10kN
    Screw type wedge action grips 10kN

    2  Pages

  50. Creep compressive test device for cardboard
    Creep compressive test device for cardboard

    2  Pages

  51. Creep testing device
    Creep testing device

    2  Pages

  52. Hardness testing software Hardwin XL
    Hardness testing software Hardwin XL

    3  Pages

  53. Test Device for Compression TEST 150 kN
    Test Device for Compression TEST 150 kN

    2  Pages

  54. Drop weights for drop test
    Drop weights for drop test

    3  Pages

  55. arm rest load pad
    arm rest load pad

    2  Pages

  56. Pneumatic test axis, load or load/position controlled
    Pneumatic test axis, load or load/position controlled

    2  Pages

  57. Impact hammers and impact devices
    Impact hammers and impact devices

    2  Pages

  58. additive weights
    additive weights

    2  Pages

  59. Creep bending test device
    Creep bending test device

    2  Pages

  60. Loading unit for creep stress rupture test
    Loading unit for creep stress rupture test

    2  Pages

  61. Hydraulic Universal Testing Machine Inspekt 1000-HF
    Hydraulic Universal Testing Machine Inspekt 1000-HF

    3  Pages

  62. Universal testing machine Inspekt S-XL 600kN
    Universal testing machine Inspekt S-XL 600kN

    2  Pages

  63. Test rig for aircraft and car seats
    Test rig for aircraft and car seats

    2  Pages

  64. Fatigue test stand for fittings
    Fatigue test stand for fittings

    2  Pages

  65. Hydraulic Universal Testing Machine Inspekt 1000-H
    Hydraulic Universal Testing Machine Inspekt 1000-H

    3  Pages

  66. High temperature extensometer
    High temperature extensometer

    2  Pages

  67. High temperature furnaces
    High temperature furnaces

    4  Pages

  68. Universal testing machine Inspekt micro S500N
    Universal testing machine Inspekt micro S500N

    2  Pages

  69. Combined test rig for mattresses EN 1957, ASTM F1566
    Combined test rig for mattresses EN 1957, ASTM F1566

    4  Pages

  70. Calibration machine 2500 kN
    Calibration machine 2500 kN

    2  Pages

  71. Furniture testing - Single test rigs - Stability of chairs
    Furniture testing - Single test rigs - Stability of chairs

    2  Pages

  72. Universal testing machine Inspekt table
    Universal testing machine Inspekt table

    2  Pages

  73. Screw type wedge action grips 100kN and 250kN
    Screw type wedge action grips 100kN and 250kN

    4  Pages

  74. Screw type wedge action grips 20kN and 50kN
    Screw type wedge action grips 20kN and 50kN

    4  Pages

  75. Furniture testing - Double test rig for side-to-side and arm rest testing
    Furniture testing - Double test rig for side-to-side and arm rest testing

    2  Pages

  76. Wedge type grips
    Wedge type grips

    3  Pages

  77. Hydraulic Universal Testing Machine Inspekt 500-H
    Hydraulic Universal Testing Machine Inspekt 500-H

    3  Pages

  78. Torsion testing devices
    Torsion testing devices

    4  Pages

  79. Universal testing machine Inspekt 300kN
    Universal testing machine Inspekt 300kN

    2  Pages

  80. Universal Testing Machine Inspekt 600kN
    Universal Testing Machine Inspekt 600kN

    2  Pages

  81. Universal testing machine Inspekt 250kN
    Universal testing machine Inspekt 250kN

    2  Pages

  82. Universal linear module
    Universal linear module

    2  Pages

  83. Testing machine for micro system engineering
    Testing machine for micro system engineering

    4  Pages

  84. Test rig for tilting-drop tests at chairs
    Test rig for tilting-drop tests at chairs

    2  Pages

  85. Ladder test stand
    Ladder test stand

    3  Pages

  86. 1D heavy length measurement devices, tabletop
    1D heavy length measurement devices, tabletop

    4  Pages

  87. Brinell hardness tester
    Brinell hardness tester

    2  Pages

  88. Rockwell hardness tester for crank shafts
    Rockwell hardness tester for crank shafts

    2  Pages

  89. Magnescale Digital gauge catalog
    Magnescale Digital gauge catalog

    24  Pages

  90. Special testing machine for foamed materials inspekt S 5kN
    Special testing machine for foamed materials inspekt S 5kN

    2  Pages

  91. Shock test stand
    Shock test stand

    2  Pages

  92. Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs
    Double test rig for alternating bending tests on seating furniture, upholstery, and interlocking chairs

    2  Pages

  93. Furniture and component testing equipment
    Furniture and component testing equipment

    9  Pages

  94. Furniture testing - Single test rigs - Long-term loading and shock absorption measurement on shoes
    Furniture testing - Single test rigs - Long-term loading and shock absorption measurement on shoes

    2  Pages

  95. Furniture testing - Single test rigs - Long term tests on foamed materials
    Furniture testing - Single test rigs - Long term tests on foamed materials

    2  Pages

  96. Furniture testing - Single test rigs - Universal testing machine for furniture components
    Furniture testing - Single test rigs - Universal testing machine for furniture components

    2  Pages

  97. Furniture testing - Single test rigs - Horizontal shock testing device
    Furniture testing - Single test rigs - Horizontal shock testing device

    2  Pages

  98. Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture
    Furniture testing - Single test rigs - Position adjustements of fittings on bedframes, upholstered and seating furniture

    2  Pages

  99. Furniture testing - Single test rigs - 3D-measurement device for chairs
    Furniture testing - Single test rigs - 3D-measurement device for chairs

    2  Pages

  100. Furniture testing - Single test rigs - Laser distance finder
    Furniture testing - Single test rigs - Laser distance finder

    2  Pages

  101. Furniture testing - Portal drop test rig
    Furniture testing - Portal drop test rig

    2  Pages

  102. Furniture testing - Threshold test
    Furniture testing - Threshold test

    2  Pages

  103. Furniture testing - Test stand for long term tests on drawers
    Furniture testing - Test stand for long term tests on drawers

    2  Pages

  104. Furniture testing - Test rig for side-to-side tests on seat furniture
    Furniture testing - Test rig for side-to-side tests on seat furniture

    2  Pages

  105. Furniture testing - Displacement rig for tables and chairs
    Furniture testing - Displacement rig for tables and chairs

    2  Pages

  106. Furniture testing - Test rig for tables and beds
    Furniture testing - Test rig for tables and beds

    2  Pages

  107. Furniture testing - Alternating bending test rig
    Furniture testing - Alternating bending test rig

    2  Pages

  108. Alternating bending test rig for seat and backrest testingt
    Alternating bending test rig for seat and backrest testingt

    2  Pages

  109. Alternating bending test bench - Furniture testing
    Alternating bending test bench - Furniture testing

    2  Pages

  110. Furniture testing - Calmar I - PLC based furniture and component testing system
    Furniture testing - Calmar I - PLC based furniture and component testing system

    2  Pages

  111. Accessories Furniture testing - Loading Pads
    Accessories Furniture testing - Loading Pads

    4  Pages

  112. Accessories for child furniture testing
    Accessories for child furniture testing

    2  Pages

  113. Accessories Furniture testing - Fixing elements
    Accessories Furniture testing - Fixing elements

    2  Pages

  114. Accessories Furniture testing - Drop weights
    Accessories Furniture testing - Drop weights

    2  Pages

  115. Load pads for arm rests
    Load pads for arm rests

    2  Pages

  116. Furniture testing - Weight disks
    Furniture testing - Weight disks

    2  Pages

  117. Friction test stand
    Friction test stand

    2  Pages

  118. Rockwell hardness tester for large components
    Rockwell hardness tester for large components

    2  Pages

  119. test rig for durability tests on doors
    test rig for durability tests on doors

    2  Pages

Archived catalogs

  1. Swivel test rig for seating furniture
    Swivel test rig for seating furniture

    4  Pages

  2. Hydraulic grips 250kN
    Hydraulic grips 250kN

    2  Pages

  3. Combined test rig for position adjustments of fittings on bedframes, upholstered and seating furniture
    Combined test rig for position adjustments of fittings on bedframes, upholstered and seating furniture

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.