AG RANGE AUTOMATIC FILTERS AUTOMATIC FROM The versatile automatic filters in the Hectron AG range are available with filtration degrees from 0.5 to 500 microns. The washing system with suction arm offers optimum efficiency with low water consumption. Washing system electronic control unit. Supplied fully equipped, with indicator lights and cycle counter (except AG100). 230 V motor to rotate the washing mechanical assembly. Membrane-type differential pressure switch to trigger the washing cycles. Pilot-operated solenoid valve, with anti-clogging protection, to evacuate solids. High-performance filtering sieve, consisting of a stainless steel support cylinder and a synthetic filter membrane. Stainless steel housing.

Filtration. Filtration is carried out through a cylindrical sieve. When this sieve is clogged, a pressure switch detects the pressure difference between the inlet and the outlet and triggers the washing cycle. Washing. Washing is carried out by means of a suction arm, which carries out back-washing focused on the openings in the arm. The arm rotates and therefore cleans the entire sieve surface. Filtering sieve Evacuation. During washing, a solenoid valve opens and the suspended solids are evacuated out of the filter. Model AG100 1’’ Inlet / outlet 1’’ BSPF Model Inlet / outlet 0.5 gm and 1 gm...

Inlet / outlet 0.5 |im and 1 gm membranes available on option. AG400 Model Inlet / outlet 0.5 to 2 gm: non-woven membrane 3 to 500 gm: cloth membrane ■ Very fine filtration degree. ■ Precision-woven cloth, square mesh. ■ Good opening coefficient: relatively high crossing flow rate. ■ Suitable for all types of suspended solids, excellent lifetime. ■ Good turbidity reductions. ■ fine mineral solids (clay, silt) polymer flocculating agents iron, manganese ■ mineral solids polymer flocculating ■ organic solids

TECHNICAL SPECIFICATIONS unite AG100 Maximum working pressure Bar 5 Minimum inlet pressure Bar 2,5 Minimum outlet pressure Bar 2 Maximum water temperature °C 50 Maximum size of suspended solids mm 3 Electricity supply |v/Hz 230/50 Ingress protection rating IP40 Weight filled with water Kg 27 Volume of water discharged per washing cycle L 5 Washing cycle duration s 5 Washing cycle instantaneous flow rate m3/h 3,6 Maximum head loss Bar 0,5 m Filter housing Stainless steel 304 Stainless steel 316L SST 316L + coating Evacuation solenoid valve (Marine version: motorized valve) Brass Stainless steel...

The inlet and outlet can be rotated relative to each other (180°, 90°, etc.)

Well water Potable water Well water for domestic or commercial use. By choosing the finest filtration degrees, these flltres enable to eliminate most of the SS present in these waters: sand, earth but also clays. Use in geothermal, potabilisation, watering. These filters are used in potabilisation units. In reverse osmosis protection, thanks to their very fine iltration degree, they provide an optimum protection of membranes. They can also be used before ultra filtration or a UV system. Installing a filter enables to secure the rejections after clarifier. Choosing an automatic filter avoid the...