Overview

This document provides detailed specifications and dimensions for a wide range of mechanical tools and components, including wrenches, pliers, screwdrivers, and sockets. It includes part numbers, sizes, weights, and dimensional parameters essential for selection and application.

Section 1: Component Identification and Dimensions

The document lists numerous part numbers (e.g., 7102-1002 to 7102-1028, 7301-8 to 7301-20, 7401-8 to 7401-32) associated with specific tool types and sizes. Each entry includes key dimensional data such as length (L), width (B), height (H), and weight (g), often provided in both metric (mm) and imperial (inch) units.

For example, the 7102 series details tools with lengths ranging from 35 mm to 377 mm and weights from 2 g to 10 g, with corresponding widths and heights specified. Similarly, the 7301 and 7401 series provide size increments from 8 mm to 32 mm with associated dimensions and weights, indicating a comprehensive range of tool sizes.

Section 2: Tool Types and Descriptions

The document references various tool types, including:

• Wrenches (Single Open End, Sliding T Type)
• Pliers (Lineman, Diagonal Cutting)
• Screwdrivers (Slotted, Phillips)
• Sockets (1/2 inch)

Each tool type is associated with specific size ranges and dimensions, for example, wrenches with sizes 10, 11, 12, 13, 14, 17, 19 mm and pliers with lengths such as 8" and 6".

Section 3: Dimensional Parameters and Standards

The document provides detailed dimensional parameters such as:

• Length (L), Width (B), Height (H) in millimeters and inches
• Weight (g) for each tool or component
• Maximum dimensions (Kmax) for certain components
• Size numbers and diameter (Φ) for specific parts

This data supports precise tool selection and ensures compatibility with mechanical systems and standards.

Section 4: Packaging and Physical Specifications

Packaging dimensions are briefly mentioned, for example, a package size of 400*290*90 mm is noted, likely referring to tool sets or kits.

Critical Information and Best Practices

• Ensure correct part number selection based on required size and dimensional parameters.
• Verify weight and size compatibility for intended mechanical applications.
• Use the provided metric and imperial measurements for accurate tool matching.
• Refer to the detailed size ranges for screwdrivers and wrenches to select appropriate tools for specific fasteners.

Summary

This technical document serves as a comprehensive reference for mechanical tool specifications, providing essential data for engineers, technicians, and procurement specialists to select and apply tools accurately. The structured presentation of part numbers, sizes, weights, and dimensions facilitates efficient tool management and ensures adherence to mechanical standards.