*mydirectindustry

Catalogs
HEBEI BOTOU SAFETY TOOLS CO.,LTD
X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories

Product catalog summary

Overview: The document provides a detailed list of specifications for various components identified by unique numbers. Each component is characterized by its material composition, dimensions, and weight.

Specifications:

Materials: The components are primarily made of Be-Cu (Beryllium Copper) and Al-Cu (Aluminum Copper).
Dimensions: The dimensions are provided in millimeters (mm) and inches, including length (L), breadth (B), and diameter (D) where applicable.
Weight: The weight of the components is specified in grams (g) for both Be-Cu and Al-Cu materials.

Key Data Points:

Component 244A-1002: Be-Cu weight is 98g, Al-Cu weight is 245g, length is 210mm.
Component 243-1002: Be-Cu weight is 290g, Al-Cu weight is 360g, length is 235mm.
Component 246-1002: Be-Cu weight is 6g, Al-Cu weight is 150g, length is 180mm.
Component 257A-1002: Be-Cu weight is 3070g, Al-Cu weight is 8400g, length is 600mm.

Observations:

The document lists a variety of components with differing specifications, indicating a range of applications and uses.
Components are categorized by their unique numbers, which likely correspond to specific product lines or models.

Catalog excerpts

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-1

Safety Tools FORGED TOOLS,HIGH DENSITY LONGEVITY AGAINST DURABLE WEAR

Open the catalog to page 1

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-2

• Hand-operated cutting instruments.

Open the catalog to page 2

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-3

Safety Tools • Hand-operated cutting Serrated teeth with slip joint.

Open the catalog to page 3

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-4

Safety Tools • Used for cutting and crimping

Open the catalog to page 4

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-5

Safety Tools The concentration of force is either to a point, or to an edge perpendicular to the length of the tool. This allows pincers to be brought close to a surface, as is often required when working with nails.

Open the catalog to page 5

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-6

Safety Tools The upper jaw can be moved to a number of positions by sliding along a tracking section under the lower jaw. An advantage of this design is that the pliers can adjust to a number of sizes without the growing wider. • Used for cutting wire or holding tiny

Open the catalog to page 6

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-7

Safety Tools • Cutting wire or holding tiny • Install and remove snap

Open the catalog to page 7

X-Spark Safety Tools Category E widely used in oil andgas works and explosive manufactories-8

• Remove insulation without

Open the catalog to page 8

All HEBEI BOTOU SAFETY TOOLS CO.,LTD catalogs and technical brochures

Archived catalogs

X-Spark Safety Tools Category A widely used in oil andgas works and explosive manufactories
14 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list