Group: ZHONGBO GROUP
Catalog excerpts
Safety Tools • It is suitable for different sizes of fasteners by adjusting the opening size.
Open the catalog to page 2Safety Tools • Replace the adjustable wrench by used for heavier task.
Open the catalog to page 3Safety Tools • Used for tighten or loosen bigger sizes pipes and pipe fittings.
Open the catalog to page 4Safety Tools • Used for diassembling or assembling Ky©o te^ Eft© (Amfen HM • Used for diassembling or assembling • Used for diassembling or assembling • Used for diassembling or assembling
Open the catalog to page 5Safety Tools • Used for diassembling or assembling pipes and fittings, * The bent head (45 degree special space.
Open the catalog to page 6Safety Tools It is adjustable wrench used for diassembling or operated, easy
Open the catalog to page 7Safety Tools • Both ends generally fit the same size of bolts
Open the catalog to page 8Safety Tools used in narrow space.
Open the catalog to page 9Safety Tools Matched with torque wrench, used to perform protection when tighten or loosen special bolts and nuts.
Open the catalog to page 10Safety Tools
Open the catalog to page 11Safety Tools 0 Different from the slogging open, the bent head (45 degree angle) can be used in special space. • Used to tighten or loosen
Open the catalog to page 12Safety Tools 0 Used to tighten or loosen
Open the catalog to page 13Safety Tools raraBsfo,, Eteafffls Spaa Bri Used to tighten or loosen
Open the catalog to page 14Safety Tools * Used to tighten or loosen bolts and nuts, suitable for use where space is narrow or deep concavity.
Open the catalog to page 15Safety Tools Used to tighten or loosen bolts and nuts, suitable for use where space is limited instead of double end open
Open the catalog to page 16Safety Tools • Used to tighten or loosen bolts and nuts. • Sharp tail.
Open the catalog to page 17Safety Tools • Used to tighten or loosen bolts and nuts, suitable for use where space is limited instead of straight single box wrench.
Open the catalog to page 18Safety Tools • Used to tighten or foosen bolts and nuts, suitable for use where space is limited or deep concavity.
Open the catalog to page 19Safety Tools • Slugging Wrenches are designed for loosening or tightening nuts and bolts where impact or shock loading is required. These are used with hammer.
Open the catalog to page 20Safety Tools • This is a specialized thick, stocky wrench with a block end to the handle specifically designed for use with a hammer, enabling one to impart great force • Offset pattern, because of its offset angle it raises the level of wrench above surface
Open the catalog to page 21Safety Tools GtoJ® ta^DMi@ ©asms • Used to tighten or loosen large bolts and nuts. • The convex head are suitable for use where space is deep concavity.
Open the catalog to page 22Safety Tools • Matched with extra long extension bar, save effort.
Open the catalog to page 23Safety Tools • Used to open and close square valves.
Open the catalog to page 24Safety Tools • It is quicker to use than the conventional type, as the ball point provides a leacHn to screw heads.
Open the catalog to page 25Safety Tools KbQW fcflsfoo ©gmu© [fay • Used to fasten or remove square socket screws
Open the catalog to page 26Safety Tools • Facilitate fitting and removal of radiator valves. • Tighten or loosen bolts valves.
Open the catalog to page 27Safety Tools • Designed to tighten or loosen round head screws, threaded collars and retainer rings, shafts etc.
Open the catalog to page 28Safety Tools • Tighten or loosen bolts valves. F type, widely used.
Open the catalog to page 29Safety Tools • Circular head and thick jaws increased the contact area with the valves. Easy to use ,
Open the catalog to page 30Safety Tools Used to provide leverage on hand-operated valve wheels.
Open the catalog to page 31Safety Tools • Commonly used to open bungs
Open the catalog to page 32Safety Tools • Commonly used to open bungs on large oil drums, Japanese type, multiple uses.
Open the catalog to page 33Safety Tools • Reversing the direction of operation in situ without detaching the sockets. It has built in mechanisms for both right and left operation. The ratchets have replaceable gear-pawl assembly.
Open the catalog to page 34Safety Tools • Reversing the direction of operation in situ without detaching the sockets. It has built in mechanisms for both right and left operation. The ratchets have replaceable gear-pawl assembly.
Open the catalog to page 35All HEBEI BOTOU SAFETY TOOLS CO. catalogs and technical brochures
-
X-spark Introduction
3 Pages
-
X-spark Work site
2 Pages
-
X-spark Certificate
6 Pages
-
X-spark Content
2 Pages