Silicone heaters Silicone heaters are designed for heating flat components. The heat-generating heating conductor has the shape of a wire or a film and is framed between two glas-fibre reinforced silicone mats. This makes this heating element variant water-tight and flexible. The silicone heaters can be designed self-adhesive on one side. The other side can be equipped with a silicone foam insulation. This ensures a good heat transfer and minimizes losses to the outside. Anwendungsbereiche: Speichern Life Science Am Höhmelskopf 8 | D-51580 Reichshof | Telefon: 0 22 65/99 70-0 | Fax: 0 22 65/99 70 70 E-mail: [email protected] | www.heatsystems.d

Silicone surface radiators can be produced up to a maximum width of 940 mm and a maximum length of 3000 mm. Structure of the heating elements The heating conductor which converts electrical energy into thermal energy, can be designed as: • Wound wiret Ideal for prototypes or low numbers of pieces since the non-recurring costs are low. • Etched film Ideal for medium and higher numbers of pieces. This provides more exact temperature distributions than the design with its wound wire. The heating conductor is embedded between fibre-glass reinforced silicone mats, each having a thickness between 0.7...

Produktseite • Electromechanical control. Thermostats installed on the tool are price-efficient controllers whose accuracy is sufficient for many applications. II. Sensors • Thermal protectors and limiters as capillary thermostats (as a safety design as well). • Temperature sensors for tool and heating element temperatures. Electrical connections A variety of designs is available for silicone heaters. We are prepared to agree with you on the variant suitable for your application, considering factors such as temperature, mechanical load and environmental influences. I. Electrical connections •...