Flange heaters and process heaters with connection housings in flame proof design Electric flange heater DN 200 heatsystems designs and produces flame proof connection housings for their product range of electrical flange heaters and process heaters. Same quality standard and same options as for the „normal“ designs are available. From the standard applications for process heat, over the nearly-dead-legfree design up to the dead-leg-free heating elements for heating up ultra pure media. The flame proof housing, optionally equipped with increased safety connection box offer sufficient safety for application in zone 1 and 2. Generally speaking the flame proof housings are produced from stainless steel and optionally available electrically polished. Rust due to ineffective corrosion protection is a thing of the past. Standard designs for gas- and dust-exapplications. Temperature classes T1 to T6 and for gases IIB and IIC.

Flange heaters and process heaters with connection housings in flame proof design Electric flange heater for heating of water 80 kW 400 V. heatsystems electric flange heaters and electric process heaters were designed for direct heating of varic liquid and gaseous media. They are used preferably for heating: ■ fully desalinated water ■ non-agressive circuit water ■ non-flammable gaseous media and Am Hohmelskopf 8- D-51580Reichshof Tel.++492265/9970-0- Fax ++492265/997070 • e-mail: [email protected] • www.heatsystems.de EX2/11

Flange heaters and process heaters with connection housings in flame proof design Flange plate Dimensions according to: EN 1092-2, form A as normal version On request also in form C or form N according to DIN 2512 ANSI standard B 16.5 rf Tri-Clamp according to DIN 32676 For vessels according to DIN 4800 to 4805 According to customer requirements. Connection housing in flame proof design DN 200. Connection area with sufficient space. Available materials for heatsystems electric flange heaters and electric process heaters heatsystems electric flange heaters and electric process heaters consist...

Flange heaters and process heaters with connection housings in flame proof design Electric process heater DN 100 with connection housing in flame proof design Other options in heatsystems electric flange heaters and electric process heaters: dead-leg-free version roughness depth of the parts which come into contact with the medium Ra <0.8 µm material certification according to EN 10204-3.1 acceptance by TÜV, GL, DNV, LR, BV gap between tube plate and heating elements reduced to minimum deadleg (nearly dead-leg-free version) complete temperature control and control temperature limiting, also with...

Flange heaters and process heaters with connection housings in flame proof design Electric flange heater DN 40 2000 W, dead-leg-free version, for heating of gas. Electric flange heater with connection housing in flame proof design with open cooling zone. Am Höhmelskopf 8 · D-51580 Reichshof · Tel.++49 22 65/99 70-0 · Fax ++49 22 65/99 70 70 · e-mail: [email protected] · www.heatsystems.de