PRIME-PHIN
4Pages

Description prime-phin is a stainless steel dirt separator that protects closed-loop systems from circulating contaminants. The lid is connected with a quick bolt system made of eye bolts to facilitate the bag change operation. Additionally, the lid is equipped with a valve for the potential input of chemicals into the system. Two manometers help to monitor the build up of solids and to plan the change of bags. The filter is designed to fit neodymium magnetic rods that are ideal for removing iron impurities. The magnets are not in direct contact with the water. By removing the rods the particles will fall off into the bag. This feature makes the magnets extremely easy to clean. Design data Material data Flow rate Filter housing Drain/Vent valve Surface finish Micro shot Peening and Passivation Design temperature [°C] 90 Salinity [TDS] Design Code * Certified for the following European Drinking Water regulations: UBA, DVGW-standard W-270, WRAS och ACS.

*M = Minimum free space required for maintenance.

Filtering element Model [μm] Accessories Automatic Vent Valve • Swivelling air vent valve • Nominal pressure: 10 bar • Max. discharge pressure: 10 bar • Max. working temperature: 110°C Neodymium Magnetic Rod Neodymium magnets trap ferrous particles in the water system. This is very beneficial for systems prone to corrosion. Differential Pressure Kit Detects the pressure difference between the inlet and outlet and activates an electrical contact upon reaching a pre-set ΔP value. • Max pressure: 17 bar • ΔP range: 0.3 - 2 bar • Max temperature: 60°C

Spare Parts Description Support mesh, size 02