datasheet heation dolphin cyclo-phin

dolphin - cyclo-phin Description cyclo-phin filters are hydrocyclonic separators made of stainless steel. Their design creates a vortex from the incoming flow, separating sand and other solids with a specific gravity greater than that of water (SG≥1) from the raw water. cyclo-phin filters have a very high removal efficiency, reaching up to 99% for solids 75µm and larger, and 65% efficiency for solids at the lower limit of 50µm. These filters operate continuously without any moving mechanical parts, making them durable and cost-effective due to their virtually maintenance-free nature. They are...

dolphin - cyclo-phin datasheet Maximum flow rate Nominal pressure [bar] Maximum temperature Salinity pH range Design standard Materials Housing Vent/drain valves Accelerator cone Surface finishing AISI 304 - AISI 316 EPDM(') Nickel-plated brass - AISI 316 PVC Micro shot peening and passivation Minimum flow rate Maximum flow rate [m3/h] [m3/h] 1. Certified for contact with drinking water according to the following European regulations : UBA, DVGW standard W-270, WRAS, and ACS

dolphin - cyclo-phin datasheet Efficiency

dolphin - cyclo-phin datasheet Model CYPH 1” CYPH 1”V2 CYPH 2” CYPH 3” CYPH DN100 CYPH DN150 * M = minimum space required for maintenance

dolphin - cyclo-phin datasheet A recommended alternative to the manual drain valve is the automatic butterfly valve with a pneumatic actuator. This kit comes with a convenient L-shaped manifold that shifts the drain forward and away from its original position located beneath the filter. An alternative option to replace the manual drain valve is to install an automatic butterfly valve with an electric actuator. This kit includes an L-shaped manifold that facilitates moving the drain away from its original location under the filter and towards the front. cyclo-phin filters can be fitted with a...

Heation AB Laxholmstorget 3, 602 21 Norrköping, Sweden