broschure Description aquatorn is a stainless steel bag filter for commercial applications ideal to protect closed circuit systems from circulating impurities. The filter is available with- or without automatic vent valve and in construction shape C. Impurities are retained by a filter bag, reducing the need for cleaning operations. In addition, this filter accommodates stainless steelcoated neodymium magnetic rods, ideal for the separation of ferrous impurities. It is also possible to add chemical cleaning additives to the water to be treated, using the upper valve located on the filter lid....

broschure Technical data Maximum flow rate Nominal pressure [bar] Maximum temperature Construction shape Salinity pH range Design standard Housing Filter bags Gaskets Vent/Drain valve Pressure gauges Surface finishing Nickel-plated brass - AISI 316 AISI 304 - AISI 316 Shot-peening and passivation In/Out Max flow rate* [m3/h] Filtering surface [cm2] Drain Threaded * Important: maximum flow rates refer to the filter housing only. During the design and selection phase, reference should be made to the flow rate of the filter bag. 1. Certified for contact with drinking water according to the following...

The air vent valve automatically removes air trapped in the system, preventing corrosion, pump cavitation, and noise caused by imperfect fluid circulation. Neodymium magnets trap ferrous particles in the water system. This is very beneficial for systems prone to corrosion. Swivelling air vent valve Nominal pressure 10 bar Differential pressure kit Detects the pressure difference between the inlet and outlet and activates an electrical contact upon reaching a pre-set AP value. Spare Parts Description Material Body gasket 0219.1 EPDM Support mesh, size 01 AISI 316 Pressure gauge 0-10 bar G1/4"...

Heation AB Laxholmstorget 3, 602 21 Norrköping, Sweden