Stainless Steel Heatable Housings 316L stainless steel construction Designed to BS5500 Change element in seconds even at 200oC H130S H140 Headline heatable housings are purpose designed for hot gas analysis, such as diesel exhaust at 200ºC. The housings can be heated by any external heater, and the bayonet type head to bowl connection allows the filter element to be changed in seconds, even at operating temperature. All housings have integral support cores for positive element location and spring loaded element retainers for reliable sealing over the full temperature range. Models H130 & H140 have inlet and outlet ports in the base allowing the entire OD of the housing to be heated. Housings with S or ST suffix have both ports in the side of the housing as in the drawing. Housings with T in the suffix have the elements sealed by conventional tie-rod and element retainer. Principal Specifications Housing Model Maximum Temperature - ºC Materials of Construction (1) Head, Bowl & Internals Gaskets Principal Dimensions Filter Element Codes (2) Disposable Element (3) Stainless Steel Element PTFE Element (1) Material abbreviation, 316L = 316L Stainless steel (2) Replace ‘xx’ with grade required, e.g. 25-64-50C, SS-130-25, PT-140-03 (3) S-type elements only recommended for heatable housings