Filter Element: 12-32-40K Technical Specification Description Materials of Construction Filtration Efficiency Air Flow Resistance Dimensions Strength (dry) Temperature Resistance Chemical Resistance Disposable Particulate Filter Element Borosilicate Glass Microfibres bonded with Kynar fluorocarbon (P.V.D.F.) resin Better than 99.9998+% removal of 0.1 micron particles Less than 6.0KPa at 6m/min in air at 25°C I.D. - 12.5mm ± 0.25mm O.D. - 17.0mm ± 1.5mm Length - 32.5mm ± 0.25mm Burst minimum - 0.8 Bar Collapse minimum - 1.2 Bar -50°C to +150°C maximum air Resistant to all mineral, vegetable And synthetic compressor lubricants Consult chemical resistance chart for Other gases and liquids For further specific information please contact our Technical Department This is a guide only Headline Filters Limited Mill Hall Business Estate Aylesford Kent, ME20 7JZ www.headlinefilters.com [email protected] DO NOT SCALE DRAWING IF IN DOUBT ASK Filter Element: 12-32-40K Material: Borosilicate Glass Microfibres bonded with Epoxide Ester resin only THE COPYRIGHT OF THIS DRAWING IS RESERVED BY HEADLINE FILTERS. IT IS ISSUED ON CONDITION THAT IT IS NOT COPIED, REPRODUCED OR DISCLOSED TO A THIRD PARTY EITHER WHOLLY, OR IN PART WITHOUT CONSENT IN WRITI