HEAD acoustics Drive Selection^ Recording Time HEAD acoustics GmbH 1 data sheet D3705e2_ . subject to change, last update: 06/24

labSAR I enables HEADlab systems to be used standalone or remote-controlled even for very long measurements. Basis of labSAR I is the rugged and noiseless recording unit labSAR I.1. It is quickly and securely connected with one or more labCTRL II.1 controllers as well as with the connected input modules. Together they form a HEADlab system that automatically performs stand-alone measurements or can manually be remote-controlled via smartphone, tablet, or PC. Depending on the number of channels and the storage capacity, labSAR I.1 enables even longer continuous measurements in stand-alone operation...

DETAILS MEASUREMENTS labSAR I.1 is equipped with the factory-installed, protected operating system Windows 10 IoT. Via USB, up to four labCTRL II.1 can be connected – an additional synchronization via HEADlink is required. Via LAN, the use of more than four controllers is possible, depending on the capacity of the network. labCTRL II.1 also allows mixed configurations with USB and LAN. Each controller can be equipped with up to ten input modules. After power-on, labSAR I.1 automatically establishes the connections to the controllers and identifies all input modules (Auto Connect). Stand-alone...

WEB INTERFACE The clearly structured web interface is used for configuration and control of labSAR I.1 and the connected HEADlab system. Each labSAR I.1 uses an individual web address which can be conveniently accessed via smartphone, tablet, or PC. Users can individually configure labSAR I.1, the labCTRL II.1 controllers, the input modules, and the individual channels in just a few steps and then immediately start their measurements. Channel list / frontend Via Auto Connect, labSAR I.1 automatically identifies the connected controllers, the input modules, and the sensors and clearly displays...

> Power adapter for labCTRL II.1 and labSAR I.1 > LEMO 4-pin ^ terminal plug, LEMO 4-pin > Power adapter for labCTRL II.1, labSAR I.1, and labSWP-x > Type A ^ type C, with screw connection > 4-port LAN switch (PTP, Precision Time Protocol) labSWP-8 (Code 3707.2-8) > 8-port LAN switch (PTP, Precision Time Protocol) > HEADlab storage module with removable frame for Solid State Discs (SSD) > Solid State Disc (SSD), 2 TB, internal SSD, 2.5", SATA > Three modules or two modules ^ labCTRL II.1 > Two modules or one module ^ labCTRL II.1 > 2 x connection plate for labCTRL II.1, labSAR I.1, and labSWP-x...

> HEADlab stand-alone recording module consisting of recording unit and recorder software HEAD acoustics Contact Information Ebertstrasse 30a 52134 Herzogenrath, Germany Phone: +49 2407 577-0 E-Mail: [email protected] Website: www.head-acoustics.com