DATA SHEET HEAD lab Compact multi-channel data acquisition systems of the second HEADfab generation with 12 (fabCOMPACT12 II) or 24 (fabCOMPACT24 II) channels for connecting analog and ICP sensors. HEAD acoustics GmbH 1 Data Sheet D31020_31021e2_ subject to change, last update: 05/24

fabCOMPACT12 II Code 31020fabCOMPACT24 IICode 31021 /abCOMPACT12 II and /abCOMPACT24 II are compact systems that combine important functions of a second-generation HEAD/ab controller and an input module /abV12 II respectively /abV24 II for analog and ICP sensors in one device. The compact systems can be quickly and easily extended with an additional input module, as well as other compact systems and controllers. /abCOMPACT12 II provides 12, /abCOMPACT24 II 24 analog/ ICP input channels that can be used with a sampling rate of up to 51.2 kHz. Both compact systems provide a maximum sampling rate...

DETAILS labCOMPACT12 II and labCOMPACT24 II are compact systems of the second generation and provide numerous improvements and innovations. The enhanced transmission protocol HEADlink 2.0 provides twice the data rate compared to the previous protocol and 32 bits per sample. Sample rates of up to 204.8 kHz are also possible in conjunction with secondgeneration HEADlab input modules, which can be connected additionally. Compact design High performance Compact systems combine the basic functions of a secondgeneration HEADlab controller with 12- or 24-channel input channels in single and handy devices....

ARTIFICIAL HEADS Controllers of the second and first generation are compatible. Analog and ICP sensors can directly be connected with compact systems using breakout cables. An additional HEADlab input module for analog and ICP sensors can be connected via Single Link: HEAD acoustics GmbH 4 Data Sheet D31020_31021e2_ subject to change, last update: 05/24

ArtemiS SUITE > Required for using ArtemiS SUITE > Configuration and control of compact systems as well as controllers, input modules, ... > HEAD Recorder is not supported ASP 801 - Basic Decoder (Code 51801) > Decoding signals: CAN FD, CAN, OBD-2, FlexRay, navigation satellite systems, RPM, resolver Additional ArtemiS SUITE software modules (APR, ASP) > Processing and analyzing measurements, ... CONNECTION OF ANALOG SENSORS / > D-Sub 25 pin ^ 12 x BNC, female, 1 m (channels 1 to 6 and 13 to 18) > D-Sub 25 pin ^ 12 x BNC, female, 1 m (channels 7 to 12 and 19 to 24) > D-Sub 25 pin ^ 12 x BNC,...

POWER SUPPLIES FOR POWER BOXES > For labPWR I.1, labPWR I.2, labPWR I.3 Carrying case > For systems with more than 40 W and up to a maximum of 150 W HEADlab compact system for 12 analog and ICP sensors Breakout cable D-Sub 25 pin ^ Cable USB typ A ^ type C, side screw locking, 2 m Carrying case HEADlab compact system for 24 analog and ICP sensors Breakout cable D-Sub 25 pin ^ Breakout cable D-Sub 25 pin ^ Cable USB typ A ^ type C, side screw locking, 2 m Carrying case HEAD acoustics GmbH 6 Data Sheet D31020_31021e2_ subject to change, last update: 05/24

HEAD acoustics GmbH 7 Data Sheet D31020_31021e2_ subject to change, last update: 05/24

Number of interfaces USB specification Data rate (gross) Output voltage Output current Total output power Galvanic isolation Connector 1 x USB type C with lateral screw lock Data rate (gross) 5000 Mbit/s Number of interfaces Standard Data rate (gross) Galvanic isolation Power over Ethernet Output voltage 18 Vdc to 28 Vdc (identical to the input voltage) Maximum output power 15 W HEAD/ink version HEAD/ink 1.0, HEAD/ink 2.0 Maximum cable length 60 m Output voltage 18 Vdc to 28 Vdc (identical to the input voltage) Maximum output power 15 W Standard HEAD/ink 1.0, HEAD/ink 2.0, AES (via cable CLX...

1 Valid for: ambient temperature 23 °C/73 °F (±3 °C/37 °F), operating duration >1 h. Vibration excitation of the device can cause deviations. HEAD acoustics GmbH 9 Data Sheet D31020_31021e2_ subject to change, last update: 05/24

All measurement ranges receive a calibration by the factory. The measurement ranges 100 mVp to 30 Vp can additionally be calibrated in the calibration laboratory of HEAD acoustics GmbH accredited according to DIN EN ISO 17025. There is no standardized definition of „dynamics". Therefore, the Signal to Noise Ratio (SNR or S/N) value is given for the compact systems. This is calculated based on the level of a sinusoidal tone with maximum modulation in relation to the full relevant bandwidth noise floor level of the system, measured in the entire relevant frequency range. Sometimes in the literature,...