DATA SHEET HEADlab Fastening Accessories HEAD acoustics provides high-quality fastening accessories for your measurement equipment. Using these accessories helps you fasten HEADlab systems, artificial heads, labSAR components, etc. very securely and thus protect your investment. HEAD acoustics GmbH Data Sheet D1500 – 3800e1_ Subject to change, last update: 01/2

Use the flexible combinations of fastening components to connect HEAD/ab modules, artificial heads, labSAR components, etc. to form stable systems in just a few steps. For applications in vehicles, HEAD acoustics particularly recommends the MDM systems that can be used to fasten your measurement equipment in car interiors and trunks or on test benches, for example. > Wide-range, high-quality accessories for fastening HEAD/ab systems, artificial heads, labSAR systems, etc. > Increased safety for people and measurement equipment > Easy to install, highly stable > Flexible combination of the fastening...

All HEAD/ab modules have an integrated locking mechanism, enabling smaller HEAD/ab systems to be connected and disconnected without additional fastening accessories. HEAD acoustics offers high-quality fastening accessories that provide additional stability compared to the modules' integrated locking mechanism when fastening larger systems including artificial heads etc. and for use in difficult conditions. These fastening accessories do not only protect your measurement equipment from damage but also your employees from injury. Mounting the accessories is very easy, so you can use your customized...

Mount Adapters › › labMA-a (active locking mechanism) labMA-p (passive locking mechanism) The labMA-a and labMA-p mount adapters are equipped with the same locking mechanism as the HEADlab modules. They can also be screwed to an MDM system, an HSM V HEAD Seat Mount adapter, or the labSMP I.1 mounting plate, so you can use your HEADlab system safely and securely in vehicles or on test benches, for example. MDM I.0, MDM I.3, MDM I.4, MDM I.5 MDM Systems MDM systems can be used to securely fasten HEADlab systems in vehicles with or without integrated ISOFIX attachment systems. They can also be used...

It takes just a few simple steps to attach the MDM I.6 laptop holder with display support for measuring device mounts to the MDM I.0 base frame. This enables you to securely fix your laptop, align it individually, and operate it comfortably. › Use the MDM I.7 seat mount adapter to fasten your HMS V or HSU artificial head as well as a smaller HEADlab system to a car seat. MDM I.7 is mounted on the MDM I.0 base frame, ensuring that your artificial head is securely fastened with the MDM I.0 ISOFIX attachment system. The seat mount adapter is continuosly adjustable in height and tilt, enabling precise...

Connection plates (2 x) for HEADlab generation II (Code 3765.1) > Combinable with labCP I.2, labCP I.3, labMA-a, labMA-p, labRCH I.1 Connection plates (2 x) for HEADlab generation II (Code 3765.2) Combinable with labCP I.1, labCP I.2, labCP I.3, labCP I.4, labCP I.5, MDM I.3, labMA-a, labMA-p, labSMP I.1, HSM V, HTB VI, labRCH I.1 HEAD acoustics GmbH 6 Data Sheet D1500 3800e1_ , Subject to change, last update: 01/25

Connection plates (2 x) for HEADlab generation II (Code 3765.3) For fastening 3 x HEADlab module or › 2 x HEADlab module › 1 x HEADlab controller or › 1 x Supply module › 1 x HEADlab controller Combinable with labCP I.1, labCP I.2, labCP I.3, labCP I.4, labCP I.5, MDM I.3, labMA-a, labMA-p, labSMP I.1, HSM V, HTB VI, labRCH I.1 Material: Aluminum Dimensions (W x H x D): 120 mm x 138 mm x 5 mm Weight: 177 g (1 x labCP I.3) Connection plates for HEADlab generation II (Code 3765.4) For fastening 1 x HEADlab controller 1 x labSAR I.1 1 x labSWP-x Combinable with labCP I.2, labCP I.3 Material: Aluminum...

Measuring device mount with ISOFIX – base frame including MDM I.1 and MDM I.2 (Code 3764.0) Manufactured by KWH-Computerhalter GmbH For car seats without ISOFIX attachment system: › Combinable with › 1 x MDM I.1 MDM I.1 ISOFIX adapter for MDM I.0 measuring device mount Dimensions (W x H x D): 395 mm x 406 mm x 483 mm Weight (including MDM I.2 protective covers): 2.7 kg MDM I.1 is included in the scope of delivery of MDM I.0 › › MDM I.2 is included in the scope of delivery of MDM I.0 MDM I.10 Measuring device mount for trunks – base frame (Code 3764.10) Manufactured by KWH-Computerhalter GmbH...

HEADlab attachment for measuring device mounts (Code 3764.3) MDM I.7 Seat mount adapter for HMS / HSU for measuring device mount with ISOFIX (Code 3764.7) For fastening 5 x HEADlab module or › 2 x MDM I.4 › 1 x MDM I.5 Combinable with labCP I.1, labCP I.2, labCP I.3, labCP I.4, labCP I.5 For fastening 1 x HMS V artificial head or › 1 x HSU artificial head Combinable with › labMA-a, labMA-p Laptop holder including display support (Code 3764.6) Suitable for laptops 13 to 17 inches Weight: 3.8 kg Manufactured by KWH-Computerhalter GmbH HEAD acoustics GmbH

Multichannel connector plate (front or back) for measuring device mounts (Code 3764.4) MDM I.5 Multichannel connector plate (side) for measuring device mounts (Code 3764.5) > 24 x BNC cable (front connection) > 24 x BNC cable (back connection) > 24 x BNC cable (front connection) > 24 x BNC cable (back connection) HEAD acoustics GmbH 10 Data Sheet D1500 3800e1_ , Subject to change, last update: 01/25

For fastening 1 x HEADlab module or › SQuadriga III Mount adapter with passive locking mechanism (Code 3761) Combinable with labCP I.1, labCP I.2, labCP I.3, MDM I.7, labMA-a, labMA-p, HSM V, HTB VI, labSMP I.1, labRCH I.1 Material: Aluminum, polyoxymethylene (POM) Dimensions (W x H x D): 174 mm x 139 mm x 10 mm Weight: 170 g Mount adapter with active locking mechanism (Code 3760) For fastening › 1 x HEADlab module Combinable with labCP I.1, labCP I.2, labCP I.3, MDM I.7, labMA-a, labMA-p, HSM V, HTB VI, labSMP I.1, labRCH I.1 Material: Aluminum, polyoxymethylene (POM) Dimensions (W x H x D):...