DOOSAN INFRACORE GENERATOR ENGINE Ratings Definitions The power ratings of Emergency Standby and Prime are in accordance with ISO 8528. Fuel Stop power in accordance with ISO 3046. Electric power(kWe) should be estimated by considering generator efficiency, cooling fan power loss and power derating due to altitude and ambient temperature. STANDBY POWER RATING is applicable for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. A standby rated engine should be sized for a maximum of an 70% average load factor and 200 hours of operation per year. This includes less than 25 hours per year at the Standby Power rating. PRIME POWER RATING is available for an unlimited of hours per year in variable load application. Variable load should not exceed a 70% average of the Prime Power rating during any operating period of 24 hours. The Total operating time at 100% Prime Power shall not exceed 500 hours per year. A 10% overload capability is available for a period of 1 hour within a 12 hour period of operation. Total operating time at the 10% overload power shall not exceed 25 hours per year. © GENERAL ENGINE DATA o Engine Model o Engine Type o Bore x stroke o Displacement o Compression ratio o Rotation o Firing order o Injection timing o Dry weight o Dimension (LxWxH) o Fly wheel housing o Fly wheel o Number of teeth on flywheel DP180LA 4-Cycle, V-type, 10-Cylinder, Turbo charged & intercooled (air to air) 128 x 142 mm 18.273 liters 15 : 1 Counter clockwise viewed from Flywheel 1-6-5-10-2-7-3-8-4-9 21 °±1 ° BTDC @ 1800 rpm, 19°±1 ° BTDC @ 1500 rpm, 1,250 kg(with Fan) 1,592 x 1,389 x 1,223 mm SAE NO.1M Clutch NO.14M 160 o Maximum Bending Moment at Rear Face to Block 1,325 N.m o Maximum Back Pressure 5.9 kPa o Maximum Intake Air Restriction . With Clean Filter Element 2.16 kPa . With Dirty Filter Element 6.23 kPa o Max. static pressure after Radiator 0.125 kPa

Printed in September 2015_Large Engine F & A Part_DP180LA

o Type o Number of valve o Valve lashes at cold o Valve timing -. Intake valve -. Exhaust valve Overhead valve type Intake 1, exhaust 1 per cylinder Intake 0.25 mm , Exhaust 0.35 mm Opening Close © PERFORMANCE DATA Prime Power Standby Power o Governed Engine speed rpm 1500 1800 1500 1800 o Engine Idle Speed rpm 800 800 800 800 o Over speed limit rpm 1650 1980 1650 1980 o Gross Engine Power Output kW 502 559 552 615 o Break Mean effective pressure MPa 2.20 2.04 2.42 2.24 oMean Piston Speed m/s 7.1 8.5 7.1 8.5 o Specific fuel consumption 25% load liters/hr 35.4 38.6 38.3 42.0 o Sound Pressure at...

◎ DERATING FROM ISO 3046 STANDARD CONDITIONS The maximum power is the STANDBY rating when assessing derate prameters. Ambient temperature is air inlet temperature. Derate(%) (Ambient Temp) 35% (Ambient Temp) ◆ CONVERSION TABLE in. = mm x 0.0394 PS = kW x 1.3596 psi = kg/cm2 x 14.2233 in3 = lit. x 61.02 hp = PS x 0.98635 lb = kg x 2.20462 kW = kcal/sec x 0.239 lb/ft = N.m x 0.737 U.S. gal = lit. x 0.264 kW = 0.2388 kcal/s lb/PS.h = g/kW.h x 0.00162 cfm = m3/min x 35.336 MPa = kPa x 1000 = bar x 10 Doosan Infracore Co., Ltd. 21st Floor, Doosan Tower, 18-12, Euljiro 6-ga, Jung-gu, Seoul, Korea....