Screw Clamps and Universal Clamps Worm Drive Clamp Mini 180 Mini with wing screw Housing with screw Compact design: Minimal space requirement, miniature sizes Cylindrical screw head: fast, simple and safe assembly Embossed band strip: reduced risk of damage to the part being clamped Alternative with wing screw: tool integrated in the clamp Worm Drive Clamp Mini 180 Material type R 180 W2 Band: Rust-resistant chromium steel, Material no. 1.4016/UNS S43000 Screw and housing: Steel, zinc-plated, blue chromate finish Material type Mini R+S 180 W4 Band and fastener: Stainless Steel, Material no. 1.4301/UNS S30400 Screw: Stainless Steel, Material no. 1.4305/UNS S30300 Series Size range 7.0 – 19.0 mm 7.0 – 219.0 mm Clamp Design Oetiker Mini R+S Worm Drive Clamps Mini R+S Sizes 1–7 band overlapping Mini R+S Above size 8, band reverse-bent width x thickness 5.0 x 0.4 mm Type R1 5.0 x 0.4 mm Type R+S2 Some sizes are only available if an appropriate minimum quantity is ordered. 1 2 Mini R = stainless Mini R+S = stainless and acid-proof The data in this catalog are based on many years experience. They are intended for reference, not as design specificati

Screw Clamps and Universal Clamps Worm Drive Clamp Mini 180 Oetiker Mini R Worm Drive Clamps Assembly Recommendations For safe tightening of screw clamps without wing screws, we recommend to use a suitable standard screwdriver. Maximum static tightening torques: Mini R+S/wing screw 120 Ncm (10 in-lb) Order information Item No. Type Clamping range D Item No. Type Clamping range D Worm Drive Clamp Mini R1 Worm Drive Clamps with wing screw Mini R+S2 Band width 5 mm, thickness 0.4 mm Band width 5 mm, thickness 0.4 mm S = open state with hexagon-head screw GS = round state with hexagon-head screw...