kundig mmmi ”1 SWISS The Gauge Manufacturer for Film Extrusion J1 made Capacitive Thickness Gauge for Barrier Films

KllNDia WISTMtt WiB "T— SWISS The Gauge Manufacturer for Film Extrusion _H made S-100 The S-100 is an online thickness measuring system for blown film lines that measures the thickness of the film with nearly no contact. This measuring system has been developed to capacitive measure barrier film with a high percentage of PA and/ or EVOH. The S-100 TWIN measures the lay-flat width and the web position of the film at the same time. The measuring sensors can be installed at any preferred position after the collapsing frame. Because of its compact design, the system always finds enough place and...

The working principle The thickness sensor measures the total thickness of the double film that is located in the stray field of the measuring capacitor. The exact distribution of the thickness in the complete film perimeter is determined in the following way: Edge Sensor Thickness Sensor The complete film perimeter is divided in several sections. The thickness sensor measures the sum of the upper and lower film sections. The rotating movement of the haul-off or the die causes a continuous variation of the measured sections. 1. Measured Value: dt20+27 = d20 + d27 With this system of equations,...

The Gauge Manufacturer for Film Extrusion j1 made S-100 TWIN On machines with reversing haul-off or die. The reversing angle must represent at least 240°. S-100 SINGLE On machines with rotary haul-off or die.

gauge.ch Connections and interfaces Profilstar.Net The Profilstar.Net is a complete visualization system for process optimization and quality control. Up to 16 lines, equipped with Kündig online thickness gauges and / or layflat control systems, can be connected to one PROFILSTAR.NET unit. PCD-LINK via UDP/IP Ethernet The proven PCD-LINK protocol via UDP/IP can also be used to communicate to the new VDP-Process. So it is still compatible with existing host computers but at the same time offers a new and very cost efficient version. KCS-API For a fast and easy integration of Kündig measuring devices...

KllNDia WISTMtt WiB "T— SWISS The Gauge Manufacturer for Film Extrusion _H made S-100 Technical data Electrical interface values Power supply Power consumption Nominal current Switch-on peak current Ambient temperature Data processor Measuring head Transport and storage Thickness measurement Measuring principle Measuring frequency Measuring range Measuring interval Resolution Accuracy after calibration Temperature drift Ambient conditions Ambient temperature Measured film Capacitive thickness measurement Suitable for all electrically non-conducting material 400 kHz 5 to 300 mm * > 300 mm upon...

Contact person We are interested in □ Online thickness gauge □ □ Online thickness gauge and □ automatic profile control □ Offline system for □ film thickness Specifications of existing line Film width: Min.mm Film thickness: Min.mm Throughput: Min.kg/h Line speed: Min.m/min Width measurement Width measurement and control Meter weight control Processed materials: IBC: Gusseted films: Die: Haul-off: gauge.ch Max.mm Max.mm Max.kg/h Max.m/min □ Coextrusion __ Layers __ Components per layer □ No □ No □ continuously rotating □ continuously rotating ____mm . VAC_____Hz (single phase) Width of roll at...

Capacitive thickness gauge for a Non contact thickness gauge for Thickness gauge for barrier films wide range of films sticky films based on X ray backscatter Capacitive thickness gauge for Thickness gauge for quality Non contact thickness gauge for barrier films supervision sticky and sensitive films Thickness Gauges for Cast Film and MDO Lines KNC-600 Linear Scanner Non contact thickness gauge for cast film and MDO lines Width Measuring / Control System for Blown Film Lines FE-8 Width measurement and control for lines with or without IBC Filmtest 3G Offline measurement for quality control Technical...