welded steel Oil tanks welded steel

Oil tanks welded steel Oil tanks welded steel Content Service range Product description / Order code General dimensions General technical information

welded steel Oil tanks welded steelService range • Approved welding shop according to DIN EN 1090 (part 1-3) • Welding certificates available at hbe-hyd raulics.com • Certified company according to §62 of the AwSV* under the German Water Resources Act (WHG) • Leak test with certificate on request • Welding constructions and welded blanks • Machining of normal steel S 235 JR (1.0037) or stainless steel 1.4301 (V2A) resp. 1.4571 (V4A) • Reliable delivery periods and high quality standard *The Ordinance on Installations for Handling Substances Hazardous to Water (AwSV) • Tanks ready for mounting,...

Oil tanks welded steel Oil tanks welded steel Tanks according to customer specification Special tank 250 l with cover S235 JR, powder-coated Special tank 2,300 l incl. additional tank S235 JR, primed Special tank 500 l with oil sump S235 JR, painted Special tank 2,500 l with base frame S235 JR, painted Special tank 8,000 l S235 JR, painted Special tank 1,400 l 1.4301, glass bead blasted

Oil tanks welded steelProduct description • Material S 235 JR (1.0037) • Sandblasted and grounded inside and outside, resistant to hydraulic oil on mineral oil base • Leak detection with dye penetrant test • Gasket 15 x 5 mm made of perbunan (NBR) in case of screwed tank lid • Drain plug DIN 908 + CU gasket for oil drain at the tank • Comprehensive range of HBE accessories, such as cleaning covers, gaskets, oil level gauges, fillers etc. • Individual machining of lids • Final varnish • Primary coating resistant to special media (please see resistance table page 15) • Stainless steel 1.4301 (V2A)...

from NG 63 cleaning opening Standard for sizes 40 – 1,000 liters *available at short notice 10 Oil tanks welded steel

Feet of rectangular tube 80 x 80 Nominal size *Number and type of cleaning covers

Oil tanks welded steel General dimensions NG 40 – 2000 L Dimensions ÖS Bore for oil level gauge (standard) ÖS 127 = NG 40 – 400 ÖS 254 = NG 630 – 2000 Filler bore (standard) Filler bore (standard)

Oil sumps NG 63 - NG 2000 Product description • Storage volume corresponds to the net volume of the tank • Design according to the requirements of AwSV* under the German Water Resources Act (WHG). • General folded edge for protection against risk of injury • Special sizes on request *also applies for series WN-LC

Table of resistance against mineral oils and flame resistant fluids 1 = Priming coat required 2 = If coating required, use epoxy resin HFA Oil in water emulsion, water content > 80 % HFB Wate r in oil emulsion, water content > 40 % HFC Watery polymer solution (water glycol), water content > 45 % HFD Synthethic fluids (water free) HFD-R Phosphoric acid ester HFD-S Chlorinated hydrocarbon HFD-T Mixture of HFD-R + HFD-S

Oil tanks welded steel Cutting system

Oil tanks welded steel Paint spray cabin Paint spray cabin

Online catalogue HBE GmbH Hönnestraße 47 58809 Neuenrade / Germany TÜV NORD CERT GmbH