oil tanks welded steel
14Pages

WELDED STEEL OIL TANKS WELDED STEEL

OIL TANKS WELDED STEEL OIL TANKS WELDED STEEL CONTENT Service range Product description / Order code Series WN-LC / STB Series according to DIN 24339 Lid dimensions General dimensions Oil sumps General technical information

SERVICE RANGE • Approved welding shop according to DIN 18800 – 7: 2002 – 09, class C • Welding certificates available at www.hbe-hydraulics.com • Approved shop according to § 19 l, WHG (Federal Water Act) • Leak test with certificate on request • Welding constructions and welded blanks • Machining of normal steel S235JR (St37) or stainless steel 1.4301 (V2A) resp. 1.4571 (V4A) • Reliable delivery periods and high quality standard Tanks according to customer drawing up to 20,000 litres resp. 6.4 tons TANKS ACCORDING TO CUSTOMER SPECIFICATION • Tanks ready for mounting, oil sumps and welding...

WELDED STEEL OIL TANKS WELDED STEEL TANKS ACCORDING TO CUSTOMER SPECIFICATION Special tank 250 L with cover S235 JR, powder-coated Special tank 2.300 L incl. additional tank S235 JR, primed Special tank 500 L with oil sump S235 JR, painted Special tank 2.500 L with base frame S235 JR, painted Special tank 2.200 L 1.4571, glass bead blasted Special tank 1.400 L 1.4301, glass bead blasted

PRODUCT DESCRIPTION • Material S235JR (St37) • Sandblasted and grounded inside and outside, resistant to hydraulic oil on mineral oil base • Leak detection with dye penetrant test • Gasket 15 x 5 mm made of perbunan (NBR) in case of screwed tank lid • Drain plug DIN 908 + Cu gasket for oil drain at the tank AVAILABLE FOR EXTRA CHARGE • Comprehensive range of HBE accessories, such as cleaning covers, gaskets, oil level gauges, fillers etc. • Individual machining of lids • Final varnish • Primary coating resistant to special media (please see resistance table page 15) • Stainless steel 1.4301...

from NG 63 cleaning opening Standard for sizes 40 – 1,000 liters *available at short notice 10 WELDED STEEL

OIL TANKS WELDED STEEL Feet of rectangular tube 80 x 80 Nominal size *Number and type of cleaning covers

OIL TANKS WELDED STEEL Nominal size

Bore for oil level gauge (standard) ÖS 127 = NG 40 – 400 ÖS 254 = NG 630 – 2000 Filler bore (standard) Filler bore (standard) WELDED STEEL

OIL TANKS WELDED STEEL OIL SUMPS NG 63 - NG 2000 PRODUCT DESCRIPTION • Storage volume corresponds to the net volume of the tank • Version corresponds to the requirements WHG (Federal Water Act) • General folded edge for protection against risk of injury • Special sizes on request Optional with feet Nominal size *also applies for series WN-LC

• = Resistant • = Not resistant 1 = Priming coat required 2 = If coating required, use epoxy resin 3 = Resistant to oil wetting HYDRAULIC FLUIDS / MAIN COMPONENTS HFA Oil in water emulsion, water content > 80% HFB Wate r in oil emulsion, water content > 40% HFC Watery polymer solution (water glycol), water content > 45% HFD Synthethic fluids (water free) HFD-R Phosphoric acid ester HFD-S Chlorinated hydrocarbon HFD-T Mixture of HFD-R + HFD-S OIL TANKS WELDED STEEL

WELDED STEEL Cutting system

Paint spray cabin WELDED STEEL Paint spray cabin

Online catalogue HBE GmbH Hönnestraße 47 58809 Neuenrade / Germany TÜV NORD CERT GmbH Phone +49 (0) 23 94 / 616-0 info@hbe-hydraulics.com www.hbe-hydraulics.com