Hydraulic components | drive couplings | oil tanks | heat exchangers

Components for hydraulic and drive technology HBE‘s success is built on the highest technical quality standards, expert consulting, and reliable customer service. With over 40 years of industry experience, HBE has become a leading manufacturer of components for fluid and drive technology. Our product portfolio includes steel and aluminum oil tanks, shaft and flange couplings, and a wide range of high-quality hydraulic components. Craftsmanship is at the heart of everything we do – both in the production of oil tanks in our in-house steel construction department and in our customer relationships....

Oil tanks welded steel Oil tanks steel with few weld seams Oil tanks casted aluminium Tank accessories Tank heaters SOFTEX® couplings STAREX® couplings Pump mounting plates for combustion engines Selection software

welded steel Oil tanks welded steel

Oil tanks welded steel Oil tanks welded steel Content Service range Product description / Order code General dimensions General technical information

welded steel Oil tanks welded steelService range • Approved welding shop according to DIN EN 1090 (part 1-3) • Welding certificates available at hbe-hyd raulics.com • Certified company according to §62 of the AwSV* under the German Water Resources Act (WHG) • Leak test with certificate on request • Welding constructions and welded blanks • Machining of normal steel S 235 JR (1.0037) or stainless steel 1.4301 (V2A) resp. 1.4571 (V4A) • Reliable delivery periods and high quality standard *The Ordinance on Installations for Handling Substances Hazardous to Water (AwSV) • Tanks ready for mounting,...

Oil tanks welded steel Oil tanks welded steel Tanks according to customer specification Special tank 250 l with cover S235 JR, powder-coated Special tank 2,300 l incl. additional tank S235 JR, primed Special tank 500 l with oil sump S235 JR, painted Special tank 2,500 l with base frame S235 JR, painted Special tank 8,000 l S235 JR, painted Special tank 1,400 l 1.4301, glass bead blasted

Oil tanks welded steelProduct description • Material S 235 JR (1.0037) • Sandblasted and grounded inside and outside, resistant to hydraulic oil on mineral oil base • Leak detection with dye penetrant test • Gasket 15 x 5 mm made of perbunan (NBR) in case of screwed tank lid • Drain plug DIN 908 + CU gasket for oil drain at the tank • Comprehensive range of HBE accessories, such as cleaning covers, gaskets, oil level gauges, fillers etc. • Individual machining of lids • Final varnish • Primary coating resistant to special media (please see resistance table page 15) • Stainless steel 1.4301 (V2A)...

from NG 63 cleaning opening Standard for sizes 40 – 1,000 liters *available at short notice 10 Oil tanks welded steel

Feet of rectangular tube 80 x 80 Nominal size *Number and type of cleaning covers

Oil tanks welded steel General dimensions NG 40 – 2000 L Dimensions ÖS Bore for oil level gauge (standard) ÖS 127 = NG 40 – 400 ÖS 254 = NG 630 – 2000 Filler bore (standard) Filler bore (standard)

Oil sumps NG 63 - NG 2000 Product description • Storage volume corresponds to the net volume of the tank • Design according to the requirements of AwSV* under the German Water Resources Act (WHG). • General folded edge for protection against risk of injury • Special sizes on request *also applies for series WN-LC

Table of resistance against mineral oils and flame resistant fluids 1 = Priming coat required 2 = If coating required, use epoxy resin HFA Oil in water emulsion, water content > 80 % HFB Wate r in oil emulsion, water content > 40 % HFC Watery polymer solution (water glycol), water content > 45 % HFD Synthethic fluids (water free) HFD-R Phosphoric acid ester HFD-S Chlorinated hydrocarbon HFD-T Mixture of HFD-R + HFD-S

Oil tanks welded steel Cutting system

Oil tanks welded steel Paint spray cabin Paint spray cabin

steel with few weld seams Oil tanks few weld seams

Oil tanks steel with few weld seams Content Product description / Order code 21

Series WSTProduct description • High rigidity and few weld seams • Thus, the tanks meet highest demands of various hydraulic applications • Low weights are minimising freight costs • Epoxy powder coating in RAL 7011 (iron grey) for a high level surface protection and an aesthetic appearance • Delivery content: NBR lid gasket, blank steel lid, drain plug, bores for level indicator and welded steel feet • On request: individual machining of tank lids for extra charge • Specially designed lid gaskets prevent leakage oil dripping down • Short delivery times due to stock availability • NBR 70° Shore...

Series WST Nominal size Dimensions gasket Nominal size

Dimensions lids Nominal size

casted aluminium Oil tanks casted aluminium

casted aluminium Oil tanks casted aluminium Content Product description / Order code 27 General technical information 37

casted aluminium Oil tanks casted aluminiumProduct description • Low freight costs and space saving storage due to stackability • Stable casted body with good heat dissipation by material aluminium and all-round fluting • From AB 12 with feet and from size AB 44 optional with castors • Flat gasket between tank lid and tank made of paperboard or rubber cork for AB 3,5 - AB 20 • Toroidal sealing ring (endless, without contact spot) 6 mm 0 NBR for AB 30 - AB 70 • On request, all sizes with bores for oil level gauge • On request, individual lid machining available at short notice • Short delivery...

casted aluminium 'For technical data, please see chapter "tank accessories" from page 38. 28

'For technical data, please see chapter "tank accessories" from page 38.

casted aluminium 'Dimensions can be found on page 35. 2For technical data, please see chapter "tank accessories" from page 38.