HBE general catalogue
198Pages

hydraulic components fluid technology solutions Hydraulic components, drive couplings, oil tanks

COMPONENTS FOR THE HYDRAULIC AND DRIVE TECHNOLOGY HBE’s success is based on highest technical quality standards, comprehensive advice and reliable customer service. With a history of more than 35 years on the market, HBE has established itself as one of the leading manufacturers of components for fluid and drive technology. In addition to steel and aluminium oil tanks, the company’s portfolio includes shaft and flange couplings as well as an extensive range of top quality hydraulic components. Our love of craftsmanship binds things together. This applies not only to the manufacture of oil...

OIL TANKS WELDED STEEL OIL TANKS WELDLESS STEEL OIL TANKS CASTED ALUMINIUM TANK ACCESSORIES TANK HEATERS SOFTEX® COUPLINGS STAREX® COUPLINGS FLANGE COUPLINGS FOR COMBUSTION ENGINES SELECTION SOFTWARE

WELDED STEEL OIL TANKS WELDED STEEL

OIL TANKS WELDED STEEL OIL TANKS WELDED STEEL CONTENT Service range Product description / Order code Series WN-LC / STB Series according to DIN 24339 Lid dimensions General dimensions Oil sumps General technical information

SERVICE RANGE • Approved welding shop according to DIN 18800 – 7: 2002 – 09, class C • Welding certificates available at www.hbe-hydraulics.com • Approved shop according to § 19 l, WHG (Federal Water Act) • Leak test with certificate on request • Welding constructions and welded blanks • Machining of normal steel S235JR (St37) or stainless steel 1.4301 (V2A) resp. 1.4571 (V4A) • Reliable delivery periods and high quality standard Tanks according to customer drawing up to 20,000 litres resp. 6.4 tons TANKS ACCORDING TO CUSTOMER SPECIFICATION • Tanks ready for mounting, oil sumps and welding...

WELDED STEEL OIL TANKS WELDED STEEL TANKS ACCORDING TO CUSTOMER SPECIFICATION Special tank 250 L with cover S235 JR, powder-coated Special tank 2.300 L incl. additional tank S235 JR, primed Special tank 500 L with oil sump S235 JR, painted Special tank 2.500 L with base frame S235 JR, painted Special tank 2.200 L 1.4571, glass bead blasted Special tank 1.400 L 1.4301, glass bead blasted

PRODUCT DESCRIPTION • Material S235JR (St37) • Sandblasted and grounded inside and outside, resistant to hydraulic oil on mineral oil base • Leak detection with dye penetrant test • Gasket 15 x 5 mm made of perbunan (NBR) in case of screwed tank lid • Drain plug DIN 908 + Cu gasket for oil drain at the tank AVAILABLE FOR EXTRA CHARGE • Comprehensive range of HBE accessories, such as cleaning covers, gaskets, oil level gauges, fillers etc. • Individual machining of lids • Final varnish • Primary coating resistant to special media (please see resistance table page 15) • Stainless steel 1.4301...

from NG 63 cleaning opening Standard for sizes 40 – 1,000 liters *available at short notice 10 WELDED STEEL

OIL TANKS WELDED STEEL Feet of rectangular tube 80 x 80 Nominal size *Number and type of cleaning covers

OIL TANKS WELDED STEEL Nominal size

Bore for oil level gauge (standard) ÖS 127 = NG 40 – 400 ÖS 254 = NG 630 – 2000 Filler bore (standard) Filler bore (standard) WELDED STEEL

OIL TANKS WELDED STEEL OIL SUMPS NG 63 - NG 2000 PRODUCT DESCRIPTION • Storage volume corresponds to the net volume of the tank • Version corresponds to the requirements WHG (Federal Water Act) • General folded edge for protection against risk of injury • Special sizes on request Optional with feet Nominal size *also applies for series WN-LC

• = Resistant • = Not resistant 1 = Priming coat required 2 = If coating required, use epoxy resin 3 = Resistant to oil wetting HYDRAULIC FLUIDS / MAIN COMPONENTS HFA Oil in water emulsion, water content > 80% HFB Wate r in oil emulsion, water content > 40% HFC Watery polymer solution (water glycol), water content > 45% HFD Synthethic fluids (water free) HFD-R Phosphoric acid ester HFD-S Chlorinated hydrocarbon HFD-T Mixture of HFD-R + HFD-S OIL TANKS WELDED STEEL

WELDED STEEL Cutting system

Paint spray cabin WELDED STEEL Paint spray cabin

WELDLESS STEEL OIL TANKS WELDLESS STEEL

OIL TANKS WELDLESS STEEL OIL TANKS WELDLESS STEEL CONTENT Product description / Order code 21

OIL TANKS WELDLESS STEEL SERIES WLST PRODUCT DESCRIPTION • Weldless tanks produced by the deep drawing process • Guarantee a 100% tightness • High stability and weldless structure • Thus, the tanks meet highest demands of various hydraulic applications • Low weights are minimising freight costs • Epoxy powder coating in RAL 7011 (iron grey) for a high level surface protection and an aesthetic appearance • Delivery content (standard): NBR lid gasket, blank steel lid, drain plug, bores for level indicator and welded steel feet • On request: individual machining of tank lids for extra charge •...

WELDLESS STEEL SERIES WLST DIMENSIONS TANKS NG 6 – 100* *available at short notice 2

OIL TANKS WELDLESS STEEL

OIL TANKS WELDLESS STEEL SERIES WLSTDIMENSIONS HEATER CONNECTION Lid size Tank heater dimensions can be found in chapter "tank heaters" on page 65. Tank heater and filler connection also possible in combination.

DIMENSIONS GASKET OIL TANKS WELDLESS STEEL

CASTED ALUMINIUM OIL TANKS CASTED ALUMINIUM

OIL TANKS CASTED ALUMINIUM OIL TANKS CASTED ALUMINIUM CONTENT Product description / Order code 29 General technical information 39

OIL TANKS CASTED ALUMINIUM OIL TANKS CASTED ALUMINIUM PRODUCT DESCRIPTION • Low freight costs and space saving storage due to stackability • Stable casted body with good heat dissipation by material aluminium and all-round fluting • From AB 12 with feet and from size AB 44 optional with castors • Flat gasket between tank lid and tank made of paperboard or rubber cork for AB 3,5 - AB 20 • Toroidal sealing ring (endless, without contact spot) 6 mm 0 NBR for AB 30 - AB 70 • On request, all sizes with bores for oil level gauge • On request, individual lid machining available at short notice