Catalog excerpts
PRODUCT DESCRIPTION MIXING & APPLICATION A rubber-based sound deadening/sealing compound. Suitable for application to the internal or external parts of the underbody, with high ageing stability. Ready for use, it is applied with a special spray gun (BODY UBS) at a pressure of 5-6 bar (A shortened nozzle results in a fine finish where as a long one in a course finish). A Hybrid PU sealant with excellent mechanical endurance and UV resistance. It has adhesion to all metal, plastic, wooden, glass, concrete, polycarbonate and ceramic surfaces. Fast curing and overpaintable with all paint...
Open the catalog to page 2
PRODUCT DESCRIPTION MIXING & APPLICATION Two component polyester filler with excellent adhesion to plastic bumpers excluding PE (Polyethylene). Does not clog sand paper. Excellent mechanical resistance due to its high elasticity. Mix 100 parts F 222 BUMPERSOFT with 2-3 parts Body Hardener. Apply with a spatula Fiberglass two component polyester filler for bridging and filling of cavities. Also suitable for filling over corroded surfaces. Resulting in a high resistant and elastic surface. Mix 100 parts F250 BODYFIBER with 2-3 parts Body Hardener. Apply with a spatula Two component light...
Open the catalog to page 3
A. FILLING PRIMER Mix 4:1 with H 725 HARDENER for PRIMERS + 5 - 20% 740 / 741 Acryl Thinner DIN 4 @20°C (68°F) / 26 - 32s Compliant Spray gun 1.5mm – 1.8 mm / 2-3 bar HVLP 1.5mm - 1.7 mm / 2 bar. B. WET ON WET Mix 4:1 with H729 +50 - 60% 740 / 741 Acryl Thinner DIN 4 @20°C (68°F) / 14 - 16s Compliant Spray gun 1.3mm – 1.4mm / 2-3 bar HVLP 1.3mm - 1.4mm / 2 bar. A. 2 - 3h / 23°C (73°F) 20-30 min / 60°C (140°F) panel temperature IR: 8 – 12 min distance 60-70 cm Dry sanding P 400 - P 500 Wet sanding P 600 – P 1000 2x coats = 100-120 micron B. 20 - 30 min / 23°C (73°F) 1coat=20-30micron Tin:...
Open the catalog to page 4
PRODUCT DESCRIPTION MIXING & APPLICATION Extremely fast drying, Scratch Resistant clear coat, suitable for high volume body shops. Ensures durable gloss and offers excellent resistance to extreme weather conditions. Due to the rapid drying it is recommended for spot and panel repairs up to half a car. Mix 4 parts C 495 with 1 part H752 SLOW / H 753 NORMAL / H754 FAST Hardener For Topcoats or 727 Polar Hardener + 10 - 20% 715 Turbo AX (in 250ml RFU) DIN 4 / 20°C (68°F) 16-18 s Compliant Spray gun 1.3 – 1.4mm / 2 - 3 bar HVLP 1.2 - 1.3 mm / 2 bar. 2 coats An one component solvent borne mix...
Open the catalog to page 5
YOUR LOCAL DISTRIBUTOR Auto Refinishing Products HB BODY S.A. t. +30 2310 790000 f. +30 2310 790010 e. exsales@hbbody.com
Open the catalog to page 6
