NPPCCS0915 - CCS Series Calibration Cylinders_Columns

Product catalog summary

Overview: The CCS Series Calibration Cylinders/Columns are designed for chemical feed system applications, available in sizes ranging from 1/2" to 2". These cylinders are used to measure the actual output of chemical metering pumps by performing a timed draw-down of the liquid.

Key Features and Benefits:

NPT connections for easy installation.
High contrast graduation markings for clear measurement.
Direct readout in GPH and mL for convenience.
Clear, easy-view tube for visibility.
Sealed top with overflow connection to prevent spills.
Pressure rated to 15 psi at 70°F (1.03 Bar at 21°C).

Options:

Dust cover or EZ Clean option for glass cylinders.
Various end connections including BSPT, socket, flange, and true union.

Typical Applications:

Chemical dosing.
Transfer and processing.
Chlorination systems.

Materials:

PVC Cell Class 12454 per ASTM D1784.
Borosilicate glass for durability.
Thermoplastic label for identification.

Capacity and Dimensions: The document provides a detailed table listing capacities from 100 ml to 20,000 ml, with corresponding maximum flow rates, scale measurements, and dimensions in inches and millimeters.

Parts List:

Cylinder available in PVC or glass.
Top and bottom cover ends made of PVC.

Spare Parts (Glass Cylinder Only):

Dust cover top ends.
EZ Clean top ends.

Conversion Formula: To convert measurements to LPH or GPH, use the formulas: LPH = (volume/draw time) x 3.6 and GPH = (volume/draw time) x 0.952.

Contact Information: For inquiries, contact Hayward Flow Control in the USA or Canada via phone, fax, or email. Visit their website at haywardflowcontrol.com for more information.

Catalog excerpts

NPPCCS0915 - CCS Series Calibration Cylinders_Columns-1

CCS Series Calibration CylinderS/ColumnS SIZES 1/2" TO 2" PVC and Glass Calibration Cylinders/Columns for Chemical Feed system applications. Calibration cylinders are installed in the suction line to the chemical metering pump. A timed draw-down of the liquid in the cylinder provides an accurate measurement of the pumps actual output against system pressure. Key Features AND BENEFITS • NPT connections • High Contrast Graduation Markings • Direct GPH and mL readout • Clear Easy-View Tube • Sealed Top with Overflow Connection (Vent) • ressure rated to 15 psi @ 70°F/1.03 Bar P at 21°C OPTIONs • Dust Cover or EZ Clean (glass cylinder only) • SPT, Socket, Flange, Flange with Ball Valve or B True Union End Connections Typical Applications • Chemical Dosing • Transfer and Processing • Chlorination Systems Materials • PVC Cell Class 12454 per ASTM D1784 • Borosilicate Glass • Thermoplastic Label Flow Control: Valves | Actuation & Controls | Strainers | Filters | Bulkhead Fittings & Tank Accessories | Pumps

Open the catalog to page 1

NPPCCS0915 - CCS Series Calibration Cylinders_Columns-2

CCS Series Calibration Cylinders/Columns SIZES 1/2" TO 2" Parts List 1. Cylinder - PVC or Glass 2. Top Cover End - PVC • Dust Cover Top Ends SPARE Parts (Glass Cyclinder Only) DIMENSIONS (INCHES / MILLIMETERS) CAPACITY mL SAMPLE INSTALLATION To convert to LPH or GPH use this formula: LPH = (volume/draw time) x 3.6 GPH = (volume/draw time) x 0.952 Hayward is a registered trademark of Hayward Industries, Inc. © 2015 Hayward Industries, Inc. Contact Hayward Flow Control with questions: USA: 1.888.429.4635 • Fax: 1.888.778.8410 • One Hayward Industrial Drive • Clemmons, NC 27012 • Email: [email protected]...

Open the catalog to page 2