Freeze-Resistant Bottle Filler
4Pages

Freeze-Resistant Bottle Filler CONSTRUCTION Unit is made of 14 gauge Type 304 stainless steel with a satin finish that resists stains and corrosion, and has soft rounded corners. Unit features vandal-resistant bottom plate and dispensing nozzle. EFFICIENT & FLEXIBLE INSTALLATION Unit is designed for retrofit or new construction applications. No drain required for mounting over existing drinking fountain. DURABLE BUILD Good for outdoor applications where the unit may encounter freezing conditions. Made with 100% Stainless Steel for vandal resistance. MOUNTING OPTIONS Select from mounting plate and back panel models to complete installation. Unit can mount on various wall types. SPECIFICATIONS OPTIONS □ Mounting Plate: Model 6700 universal mounting plate for most wall mounted fountains. Priced Separately. □ Back Panel: Model BP15, satin finish stainless steel 15 inch back panel for Model 1920. For more information, visit www.hawsco.com or call (888) 640-4297. Model 1920FR wall mounted freeze-resistant bottle filler can be a stand-alone wall mounted station, or mounted over the 1109FR & 1119FR series fountains. It shall include stainless steel construction, a polished chrome-plated brass push-button operated by a pneumatic valve installed on the inside wall where room temperatures do not drop below 50° F (10° C), and self-draining water lines which protect the unit from freezing. REQUIRES MODEL 6521 FR PRICED SEPARATELY. This type of wall mounted bottle filler may be placed in settings such as schools, parks and other outdoor locations where the freezing temperatures may exist. Haws® manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI 61, Section 9, NSF/ANSI 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006). 1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 10 November, 2017 DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1 THIS BOTTLE FILLER REQUIRES THE USE OF MODEL 6521FR FREEZE RESISTANT VALVE —1 ASSEMBLY (SOLD SEPERATELY) 21 VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE —1 TO ALLOW ACCESS TO THE ACCESS PANEL. 3. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO. FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED ACCORDINGLY. DRAWN: DATE: CHK'D. 1455...

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 3/8" OD POLYPROPYLENE TUBING (CONNECT TO NOZZLE WITH SUPPLIED PUSH IN ELBOW, TRIM TO FIT. 6700 MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) 7/8" OD INSULATING TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM THE NOZZLE TO MODEL 6521FR ASSEMBLY, TRIM TO FIT. 1/2" NPT SUPPLY (NOT SUPPLIED) 1-1/4" NPT WASTE (NOT SUPPLIED) CONNECT AIR LINE TO BOTTLE FILLER PUSH BUTTTON, TRIM TO FIT. 6521FR FREEZE...

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 7/8" OD INSULATING TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM THE NOZZLE TO MODEL 6521FR ASSEMBLY, TRIM TO FIT. 6700.4L MOUNTING PLATE 3/8" OD POLYPROPYLENE TUBING (CONNECT TO NOZZLE (BEHIND FINISH WALL) WITH SUPPLIED PUSH IN ELBOW, - OR TRIM TO FIT. 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) CONNECT AIR LINE TO BOTTLE FILLER PUSH BUTTTON, TRIM TO FIT. INSTALLATION ABOVE HAWS 1119FR NOTES: 1 THIS BOTTLE FILLER REQUIRES THE USE...