Bottle Filling Station
5Pages

1900 Bottle Filling Station UNIVERSAL MOUNTING This unit is perfect as a stand-alone bottle filling station, or easily located over virtually any wall mounted drinking fountain or water cooler with its quick mount wall frame. The unit connects to the fountains water line, and naturally drains into the waste so there is no need for new water or drain lines. CONSTRUCTION Medium grey ABS plastic construction aesthetically blends in with stainless steel drinking fountain basins, and easily resists stains and fingerprints. USEABLE FOOTPRINT With its narrow width dimensions of only 8-1/4" (21 cm), this bottle filler can be mounted above almost any drinking fountain with ease. This compact size does not take away from its large bottle filling area accommodating bottle sizes up to 10" (25.4 cm) high. REVERSIBLE DRAIN TRAY Patent pending flexible design allows for outward drain to be reversed inward allowing drain water to be connected to waste inside of wall. PUSH BUTTON With its patented stainless steel, push-button activated valve assembly which allows for front access stream adjustment as well as cartridge and strainer access, this bottle filler offers 100% lead free waterways. The valve works at an operating pressure range of 30 to 90 psi (2.1 to 6.2 bar). Model 1900 wall mounted bottle filler shall include 100% lead-free waterways, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, patent pending reversible waste attachment for over-fountain or in-wall waste drain, medium grey ABS plastic construction, and easy to use mounting frame with easy to follow mounting instructions. APPLICATIONS □ Remote Drinking Fountain Water chiller: Model HCR8, 8 gph (30.3 L) remote water chiller provides instantaneous cooling to meet a continuous demand for chilled water. For more information, visit www.hawsco.com or call (888) 640-4297. This type of wall mounted bottle filler may be placed in settings such as: schools and other locations in and around office buildings with existing fountain installations where the temperature remains above freezing.Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws® manufactures drinking fountains and electric water coolers to be lead-free by all known definitions including NSF/ANSI 61, Section 9, NSF/ANSI 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006). 1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 07 December, 2017 DISCLAIMER: Continued product improvements make specifications subj'ect to change without notice. Check www.hawsco.com for the latest product information and updates.

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. NOTES: 1. HOLD ROUGH-IN DIMENSIONS ±1/4" (6.4mm). 2. WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES SHOULD BE ADHERED TO. FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED ACCORDINGLY. INSTALL A TRAP IN THE WASTE LINE AND A SCREWDRIVER STOP IN THE SUPPLY LINE IF REQUIRED. 3 REFER TO 5874 SERIES OPERATION & MAINTENANCE MANUAL FOR PUSH BUTTON AND VALVE INSTALLATION & MAINTENANCE INSTRUCTIONS....

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. DRAIN SETUP WALL FACE- DRAIN BASIN (REVERSED) 1-1/4" SLIP JOINT WASTE FITTING (NOT SUPPLIED) MOUNTING FRAME (SUPPLIED) MOUNTING FRAME RELIEF CUT (EXAMPLE ONLY; CUT HEIGHT MAY VARY) DRAIN BASIN (SUPPLIED) DRINKING FOUNTAIN (NOT SUPPLIED) DRAIN EXTENDER (SUPPLIED) DRINKING FOUNTAIN BACK PANEL (NOT SUPPLIED) RUN A 1/8”-3/16” DIAMETER BEAD OF RTV RIGHT ALONGSIDE THE GROOVE, BUT NOT IN THE GROOVE. CHECK THE RTV BEAD FOR THIN SECTIONS,...

WALL FACE REAR DRAIN CUTOUT (OPTIONAL) -CUT TO SIDES OF MTG FRAME OPENING & TO BOTTOM EDGE OF MTG FRAME MOUNTING FASTENER DETAIL IF A RELIEF MUST BE CUT HIGHER THAN THE MOUNTING TAB, CUT HERE TO DETACH THE SIDE OF THE MOUNTING FRAME FROM THE MOUNTING TAB. MOUNTING TAB —1 CUTTING THE MOUNTING FRAME RELIEF FLOOR LINE CENTERLINE MARKED WITH GROOVES MOUNTING FRAME & OPTIONAL REAR DRAIN CUTOUT DETAILS DRAWN: DATE: CHK'D. 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: HAWS@HAWSCO.COM WEBSITE: WWW.HAWSCO.COM MODEL(S) 1900 BOTTLE FILLER, EWC RETROFIT SCALE:...

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1/4" O.D. SUPPLY TUBING (SUPPLIED) 3" LEFT OF BOTTLE FILLER CENTERLINE; 11/16" OUT FROM WALL 1/4" O.D. SUPPLY TUBING (SUPPLIED) 3" LEFT OF BOTTLE FILLER CENTERLINE; 11/16" OUT FROM WALL ELECTRIC WATER COOLER (NOT SUPPLIED) DRINKING FOUNTAIN (NOT SUPPLIED) ' ‘ -WALL FACE FLOOR LINE 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: HAWS@HAWSCO.COM WEBSITE: WWW.HAWSCO.COM ©2017 Haws Corporation - All...