• Resilient seated gate valve according to EN 1171, EN 1074-1 and EN 1074-2 with smooth, straight-through bore • For thin-walled PE pipes (> SDR 21) and for vacuum pipelines, the use of a support liner is required • with protecting caps of recycled PE or PE foil packing to prevent ingress of dirt & dust during storage acc. to EN 12351 and EN 805 Flanges sized in accordance with EN 1092-2, drilled according to • Please specify on order - other standards on request Construction features Resilient seated gate valve with smooth, straight-through bore Hawle E3: • Double bayonet O-ring carrier is connecting the spindle to the bonnet, allowing a fully encased, uniform epoxy powder coated bonnet for further improved corrosion protection • Spindel made of Duplex stainless steel • Wedge guide made of wear resistant POM material in load optimized design minimizes attrition and ensures lowest torque actuation • Wedge is flexible and fully linked in vulcanized elastomer to the wedge nut. This snug fit dampens vibration during opening and closing of the wedge • Wedge nut has a long thread length allowing significantly higher torques than the standard before breaking • O-rings, lip-seals mounted in the bonnet are replaceable under operating pressure • Extended edge protection to avoid damages during transport, storage and assembly • Sliding disks and ball bearing assure low friction performance of the spindle • 100% suitable for buried installations • Suitable for cleaning with a cleaning pig • One extension spindle for several dimensions • Suitable for operation by automatic actuators • Easy refitting for position indicator and automatic actuators on the standard bonnet (DN 50 to DN 200) • To set-up an actuator or a position indicator, remove the centering flange and insert position indicator or actuator with adapter (DN 250 bis DN 600) • Using a lip seal ring for sealing the pipe allows for easier insertion of the pipe into the System 2000 socket • The pipe restraining system is required for pushing the pipe into the seal and chamfer with an appropriate tool • Specially developed for repairs or expansion of existing networks using plastic pipes • Easy assembly and disassembly (superior mechanical connection, no welding, minimal assem

E3 gate valve, System 2000 - flange PN 10 I PN 16 PN 10 I PN 16 Learn more about reliable System 2000 pipe connections in our Hawle Knowledge blog.

<fjawle E3 gate valve, System 2000 - flange PN 10 I PN 16PN 10 I PN 16 0d1 na DN PN Weight H H1 t L B 0A Bolts All illustrations, technical data, dimensions (in mm) and weights (all weights specified in kg) are non-binding. Subject to changes and printing errors