Enclosure Accessories Increased Safety Exe Dual Certified ATEX / lECEx Internal / External Earth stud (Included in PL Technical Data • Increased Safety M6 or M8 Stainless Steel Stud. • Ingress Protection for PL6 Series Enclosures: IP66 and • Ingress Protection for PL7 Series Enclosures: IP66 to \ Breather / Drain Device Technical Data • Fits M20 (standard) or M25 entry positions. • ATEX component approved and listed on Hawke ATEX • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22. • Ingress Protection: IP66 to IEC/EN 60529. • Operating Temperature Range: -50°C to +85°C. ^ Terminal Block Type: HTB6 Technical Data • Construction and Test Standards: IEC/EN 60079-0, • Assembly Instruction Sheet: Al 388. Note: Approved Component available from Hawke. Pillar Earth Terminal Type: PET5 Technical Data • Construction and Test Standards: IEC/EN 60079-0, • Assembly Instruction Sheet: Al 387. Note: Approved Component available from Hawke. onnection Solution

Enclosure Accessories Back Plate & Drop In Plate Back Plate / Mounting Plate The GRP enclosures, manufactured by Hawke International, are the ultimate in robust GRP construction - well above the levels required for certification. Certain GRP enclosures are designed to withstand impact resistance up to 20Nm with the requirement for Exe enclosures at just 7Nm. The GRP Range, combined with the new Hawke mounting plate, offers the installer even greater ease of fitting. The external mounting feet of the range eliminates the need to remove the lid when mounting the enclosure on the Hawke mounting...