Enclosure Type: PL630 Glass Reinforced Polyester Increased Safety Exe Dual Certified ATEX / IECEx Technical Data • Increased Safety II 2 GD Exe II ExtD. • PL630 Certificate No’s: Baseefa06ATEX0117X and • Suitable for use in Zone 1, Zone 2, Zone 21 and • FACE C 4 off - 7mm mounting holes MAXIMUM QUANTITY OF ENTRIES PER FACE Thread Size Zone 22. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. Ingress Protection: IP66 and IP67 to IEC/EN 60529. Deluge Protection to DTS01. Operating Temperature Range: -60°C to +75°C. Temperature Class and Ambient: T6 40°C, optional T5 with ambients up to 65°C. Pl630 Assembly Instruction Sheet: AI 273. ZPl630 Assembly Instruction Sheet: AI 272. Alternative certification options available: Exe II AExe II / Exe II GOST R-Exe IIU GOST K- Approved for use in Kazakhstan # Not possible with an Earth Continuity Plate. Optional: Earth Continuity Plate. For full technical specification, see Page 16 TERMINAL CAPACITY Terminal Type Max. Physical Terminal Content Reduced Terminal Content at Max. Terminal Amps Terminal Qty. Amps 23 17 For Junction Box Wattage Factor and Combined Terminal Resistance, see Pages 43 & 44 An earth terminal equal to that of the largest power terminal will be fitted. The terminals listed are restricted to a minimum operating temperature of -50°C.