Enclosure Type: PL612 Glass Reinforced Polyester Increased Safety Exe Dual Certified ATEX / IECEx Technical Data • Increased Safety II 2 GD Exe II ExtD. • PL612 Certificate No’s: Baseefa06ATEX0117X and FACE C 4 off - 7mm mounting holes MAXIMUM QUANTITY OF ENTRIES PER FACE Thread Size IECEx BAS 06.0028X. ZPL612 Certificate No’s: Baseefa06ATEX0116U and IECEx BAS 06.0027U. Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1. Ingress Protection: IP66 and IP67 to IEC/EN 60529. Deluge Protection to DTS01. Operating Temperature Range: -60°C to +75°C. Temperature Class and Ambient: T6 40°C, optional T5 with ambients up to 65°C. PL612 Assembly Instruction Sheet: AI 273. ZPL612 Assembly Instruction Sheet: AI 273. Alternative certification options available: Exe II AExe II / Exe II GOST R-Exe IIU GOST K- Approved for use in Kazakhstan * Shroud not possible with Earth Continuity Plate option. # Not possible with an Earth Continuity Plate. Optional: Earth Continuity Plate For full technical specification, see Page 16 TERMINAL CAPACITY Terminal Type Max. Physical Terminal Content 2 x 10mm2 3 x 6mm2 4 x 4mm2 4 x 0.5mm2 Min. See certificate for more options Reduced Terminal Content at Max. Terminal Amps Terminal Qty. Amps 10 17 For Junction Box Wattage Factor and Combined Terminal Resistance, see Pages 43 & 44 An earth terminal equal to that of the largest power terminal will be fitted. The terminals listed are restricted to a minimum operating temperature of -50°C.