Cable Glands North American Cable Glands/Connectors General Purpose Armour Stop 'G' Approx (Fully Compressed Length) Deluge Boot Armour Grounding Device • Outdoor or indoor use. • For use with continuous corrugated aluminium and interlocked steel Metal Clad MC and Teck type cables. • See technical section for installation rules and regulations. Entry Thread CABLE GLAND SELECTION TABLE Cable Acceptance Details Armour Jacket ‘E’ Outer Jacket ‘B’ Entry Thread Size Size Ref. Across Flats Across Corners All dimensions in inches (except * where dimensions are in millimetres). A - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering Technical Data • UL Listed for use Wet Locations. • Certificate / Listing No: E165706. • Construction and Test Standards: UL 514B. • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. • Deluge Protection to DTS01. • Operating Temperature Range: -50°C to +60°C. • Assembly Instruction Sheet: AI 315/342. • Alternative certification options available: DNV Marine Approval • Provides 360° armour grounding which is fully Inspectable. • Grounding Device remains in contact with cable when disassembled for inspection. • Provides an outer deluge seal to prevent moisture ingress to the • • • cable armour and enclosure. Deluge seal is coloured black to indicate General Purpose product. Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket. Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Cable Gland / Connector Type 701 Connection Solutions www.ehawke.com