Flameproof, Increased Safety, Dust Protection n Class - Zones - Divisions Certified ATEX / IECEx / c CSA us Outdoor or indoor use. For use with single wire armour ‘W’, wire braid ‘X’, steel tape armour ‘Z’, elastomer and plastic insulated cables with a lead inner sheath. See technical section for installation rules and regulations. . (for Lead Sheath Cables) Group II Cable Glands CABLE GLAND SELECTION TABLE Entry Thread Size 'F' Size Ref. Cable Acceptance Details Inner Sheath ‘A’ NPT * Metric Standard or Option Standard Seal (L) Seal + Bond Hexagon Dimensions Alternative Seal (K) Seal + Bond Outer Sheath 'B' Orientation 1 Across Flats Across Corners 'T' — O - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in millimetres (except * where dimensions are in inches). ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Size O is available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm Alternative Reversible Armour Technical Data Clamping Rings (RAC) Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2 GD. Certificate No’s: Baseefa06ATEX0056X and IECEx BAS 06.0013X. Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/ EN 60079-31. Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. Deluge Protection to DTS01 (Deluge Seal Optional). Operating Temperature Range: -60°C to +80°C. Assembly Instruction Sheet: AI 302 and Al 336. Features Provides armour clamping using one clamping arrangement for all armour / braid types. Provides a seal and an electrical bond to the cables lead inner sheath. Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath. Deluge protection option available, contact Hawke Technical Sales for details. Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Standard Inner Seal + Bond, add suffix L to ordering information. Alternative Inner Seal + Bond, add suffix K to ordering information. Alternative Clamping Ring (AR), add suffix AR to ordering information. Cable Gland Type 501/453/RAC 501/453/RAC 501/453/RAC Brass Brass Brass Alternative certification options available: