Catalogs >
Hawke International U.K >
495 (M to M) 90° Fixed Elbow

495 (M to M) 90° Fixed Elbow
1Pages

Catalog excerpts

Flameproof Exd / Increased Safety Exe / Dust Protection Extb Dual Certified ATEX / IECEx 494 (M to F) 90° Fixed Elbow Certification Details Certification Details General Information General Information • Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2GD. • Certificate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U. • Operating Temperature Range -60°C to +200°C. • Group II and III. • Flameproof Exd IIC Gb, Increased Safety Exe IIC Gb and Dust Extb IIIC Db II 2GD. • Certificate No's: Baseefa14ATEX0014U and IECEx BAS 14.0002U. • Operating Temperature Range -60°C to +200°C. • Group II and III. • Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated • Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel. Steel and Stainless Steel. • M20 to M75 as standard. • M20 to M75 as standard. • Other parallel male thread options available on request, • Other thread options available on request, including BSPP, PG, including BSPP, PG, ET and NPSM. ET and NPSM. NPT threads are not permitted. • NPT female threads can also be supplied in sizes ranging from • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and ½" to 3". mining applications. • NPT threads are not permitted on the Male threaded selection. • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31. • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and mining applications. • Ingress Protection: IP66. • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 • Assembly Instruction Sheet: AI 429. IEC/EN 60079-7 and IEC/EN 60079-31. • Ingress Protection: IP66. Different are permitted at each elbow, a step • Assembly Instruction Sheet: AI 428. Note:thread sizethread sizes and typesthe two threads. Whereend of thethread types /of one is permitted between different sizes are supplied, the overall dimensions may increase in size. SELECTION TABLE Male Thread Size Female Thread Size Male Thread Length (mm) Ordering Example: Product 494 SELECTION TABLE Female Thread Length (mm) Typical Block Size (mm) Male Thread Size Male Thread Size Male Thread Length (mm) Typical Block Size (mm) Always state the male thread first Thread Size Pitch Material Finish M32 Male x M32 Female 1.5 mm Brass Nickel Plated Ordering Example: Product 495 Thread Size M32 Male x M32 Male Always state the male thread first Pitch Material Finish 1.5 mm Brass Nickel Plated

Open the catalog to page 1