• Products
  • Catalogs
  • News & Trends
  • Exhibitions

153/X

153/X

Product catalog summary
Features:
  • Provides clamping for marine shipboard cable and seals on the cable's inner jacket.
  • Includes an outer deluge seal to prevent moisture ingress, colored black for General Purpose products.
  • Offers cable retention and a low smoke and fume, zero halogen seal on the outer jacket.
  • Manufactured in Brass, Nickel Plated Brass, 316 Stainless Steel, or Aluminium.
  • Nickel plating is standard for Brass NPT entries.
Application:
  • Suitable for outdoor or indoor use with armoured marine shipboard jacketed or non-jacketed cables.
  • Refer to the technical section for installation rules and regulations.
Technical Data:
  • UL Listed for Wet Locations with Listing No: E218332.
  • Complies with UL 514B construction and test standards.
  • Ingress Protection ratings: IP66, IP67, and IP68 (30 meters for 7 days) according to IEC/EN 60529 and NEMA 4X.
  • Deluge Protection according to DTS01.
  • Operating Temperature Range: -50°C to +60°C.
  • Assembly Instruction Sheet: AI 341.
  • Alternative certifications: DNV Marine Approval, ABS Marine Approval.
Ordering Information:
  • Format: Alternate Clamping Ring (S), add suffix S to ordering information.
  • Example: 153 CX M32 S or 153 CX 1"NPT S.
Cable Gland Selection Table:
  • Provides detailed dimensions and specifications for various sizes, including entry thread size, cable acceptance details, and hexagon dimensions.
  • Sizes range from Os to H, with specific measurements for each size in inches and millimeters.
See more

Catalog excerpts

153/X-1

Cable Glands North American Cable Glands/Connectors General Purpose 'G' Approx (Fully Compressed Length) Nickel Plated Hub Entry Thread Size Size NPT Standard Ref. Metric * or Option Os O A B C C2 D E F H • Outdoor or indoor use. • For use with armoured marine shipboard jacketed or non-jacketed cable. • See technical section for installation rules and regulations. CABLE GLAND SELECTION TABLE Cable Acceptance Details Alternative Seal (S) Outer Jacket ‘B’ Across Flats Across Corners All dimensions in inches (except * where dimensions are in millimetres). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For H size glands, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering ¹ Smaller value is applicable when selecting reduced NPT entry option. ² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43” ³ UL approved only. Technical Data • • • • • • • • UL Listed for use Wet Locations. UL Listing No: E218332. Construction and Test Standards: UL 514B. Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. Deluge Protection to DTS01. Operating Temperature Range: -50°C to +60°C. Assembly Instruction Sheet: AI 341. Alternative certification options available: DNV Marine Approval • Provides armour clamping for marine shipboard cable. • Provides a seal on the cables inner jacket. • Provides an outer deluge seal to prevent moisture ingress to the • • • cable armour and enclosure. Deluge seal is coloured black to indicate General Purpose product. Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket. Manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard. Ordering Information Format for ordering is as follows: Alternate Clamping Ring (S), add suffix S to ordering information. Cable Gland / Connector Type 153 Cable Gland / Connector Type 153

 Open the catalog to page 1

Archived catalogs

  1. Cable Glands

    83  Pages

  2. Ex Connectors

    8  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.